Live Sound

Supported By

One Systems Introduces 12-Inch Subwoofer at Prolight + Sound

The 112IM is a direct weather capable loudspeaker, intended to withstand exposure from the elements.

One Systems has introduced the 112IM Sub, the newest member of its range of all-weather products.

The 112IM Sub can be used outdoors and can easily withstand extended exposure to rain, snow, ultra-violet radiation and temperature extremes.

Its performance and flexibility enable its use in any high-quality sound system indoors or outside.

The One Systems’ 112IM Sub utilizes a single 12-inch (305 mm), high-output, low-frequency subwoofer that is designed to provide additional extended bass response when used in combination with One Systems’ 112IM or 212CIM enclosures.

The 112IM Sub’s woofer utilizes One System’s patent-pending Inside/Only (I/O) design in which its voice coil is wound on the inside of the voice coil’s structure.

This design enables high magnetic system displacement and increased thermal transfer that greatly minimizes power compression and improves reliability.

The 112IM Sub utilizes a thick-walled, injection-molded trapezoidal enclosure that is made with a special resin that enables it to withstand extended exposure to the elements. To improve its weather-resistance and to add to its flexibility, the 112IM Sub utilizes internal structural supports as well as stainless steel rigging points.

Its grille uses a 3-layer “rain shield” design that greatly minimizes direct rain contact with the system’s transducer. The enclosure and grille design are rated to IEC 529 / IP45 (solid object penetration to 1 mm (0.04 inches) and water jets from any direction). The enclosures and components are also designed to Mil Spec 810.

To prevent moisture intrusion through the connectors, the 112IM Sub is equipped with a stainless steel hardware barrier strip with an internal gland nut and an exterior weather cover for use outdoors. There is also a locking 4-pin Neutrik Speakon connector for indoor use.

The 112IM Sub can be used in a number of different configurations – it can be pole-mounted using its built-in 35-mm / 1-3/8- inch stand adapter and it can be flown or mounted vertically or horizontally thanks to its 17 x M10 rigging points and a vast selection of optional array brackets, mounts and eyebolt kits.

One Systems Website

Live Sound Top Stories