Products

NEXO Introduces New Point Source Loudspeaker & Companion Subwoofer

ID4 and S10S sub both designed to handle a wide range of applications and are available in portable and installation versions.
ProSoundWeb NEXO
The new ID14 point source loudspeaker and companion S108 subwoofer from NEXO.

NEXO has unveiled the new ID14 compact point source loudspeaker and companion S108 bass-reflex subwoofer, both designed to handle a wide range of applications and available in portable and installation versions.

The ID14, housed in a 5-inch cubed enclosure and weighing in at just under 4 pounds, is a dual concentric design with a 4-inch cone driver (with 1.3-inch voice coil) and a 1.4-inch-diaphragm compression driver. It is stated as being capable of output up to 116 dB SPL (peak), with a frequency response of 120 Hz to 20 kHz. Two directivity options are offered: 100- x 100-degree dispersion and an asymmetric alternative with 90- x 140-degree dispersion, ID14 enclosures hold an IP-55 rating.

Available in black, white and any RAL color, the two versions of the ID14 share common acoustic components. The installation version has an acoustic fabric fitted front grille and a cable gland with 2-core cable for audio input, which offers IP55 protection. The portable version, which uses a proprietary Magnelis steel grille, has a back plate that holds two Speakon connectors.

The companion ID S108 subwoofer with bass-reflex design is loaded with a long-excursion 8-inch Neodymium driver tuned to match the frequency response of the ID14. It too is available in black, white or custom colors on request.

A range of accessories are available for the ID14, including a dedicated U bracket that permits installation on a microphone stand. Two M6 inserts (73 mm pitch) on the rear of the cabinet facilitate wall-mount applications. Recommended amplification is the NXAMP4x1Mk2 powered TDController, which is stated to drive up to four ID14 loudspeakers per channel. A dedicated set-up for each directivity is available on the NXAMP. In addition, the DTDAMP4x0.7, when paired with a DTDcontroller, can power up to two ID14s per channel.

NEXO

Church Audio Tech Training Available Through Church Sound University. Find Out More!