Beyma has introduced two new 18-inch low-frequency cone drivers at Prolight+Sound/Messe in Frankfurt.
The new 18P1000FeV2 is an upgraded version of the popular 18P1000Fe model. It provides improved power handling—increased to 1,200 watts AES—while delivering accurate and controlled bass performance.
The 18P1000FeV2 has a redesigned magnetic assembly and convection circuit for enhanced efficiency and extremely low air noise, sounding again improved over the previous model.
Meanwhile, the new 18PWB1000Fe is designed to deliver a lower end and a deeper sound. It has a 4-inch voice coil design with a ferrite magnet.
The 18PWB1000Fe handles up to 2,000 watts program, has long excursion capabilities (12.5mm Xmax and 55mm peak to peak for mechanical displacement), and a low resonance point. It adds up to lend this driver a very deep “personality.”
18P1000FeV2 Specs:
Nominal diameter—18-inch
Nominal impedance—8 ohms
Minimum impedance—5.9 ohms
Power capacity—1200 W AES
Program power—2400 W
Sensitivity—98 dB 1 W @ 1 m @ ZN
Frequency range —25-2000 Hz
Voice coil diameter—4-inch
BL factor—27.6 N/A
Moving mass—0.230 kg
Winding length—21 mm
Air gap height—12 mm
Xdamage pp—52 mm
18PWB1000Fe Specs:
Nominal diameter—18-inch
Nominal impedance—8 ohms
Minimum impedance—6 ohms
Power capacity—1000 W AES
Program power—2000 W
Sensitivity—96.5 dB 1 W @ 1 m @ ZN
Frequency range —20-20000 Hz
Voice coil diameter—4 inches
BL factor—25.8 N/A
Moving mass—0.233 Kg
Winding length—30 mm
Air gap height—12 mm
Xdamage pp—55 mm
