Supported By

d&b xC-Series Deployed To Attain Enhanced Intelligibility At St. Eugene’s Cathedral In Northern Ireland

New distributed system using inner and outer pairs of loudspeakers help overcome acoustically challenging space.
d&b audiotechnik louodspeakers
Inside the reverbrant sanctuary at St. Eugene's Church, now with distributed reinforcement by d&b xC-Series loudspeakers.

St. Eugene’s Cathedral, the mother church of the Roman Catholic Diocese of Derry (in Northern Ireland) that opened in 1873, has always presented acoustical challenges that have now been addressed with an architectural refurbishment and the implementation of a new distributed reinforcement system utilizing d&b audiotechnik xC-Series loudspeakers.

St. Eugene’s previous sound reinforcement system had never performed satisfactorily, as it is difficult to tame the reflections and reverberations in the space. Looking for a better solution, churcs management turned to acoustical consultant Michael Kielty of Belfast-based MK Audio, who recommended a distributed system, and contacted Absolute Technologies for a specific recommendation.

Absolute Technologies, with experience in similar reverberant spaces, had a solid understanding of the challenges. Through their experiences, they became familiar with the exceptional pattern control and cardioid performance offered by the xC-Series column loudspeakers from d&b audiotechnik.

Ian McKeown of Absolute, supported by Oran Burns from d&b’s Application Support team, made an initial design for the church using d&b ArrayCalc software to predict coverage and decide on suitable loudspeaker positions. Following this, an in-situ system demonstration was arranged the confirmed the ArrayCalc predictions and delivered the improvement the client was looking for.

The design uses an inner pair of d&b 24C-E cabinets at the front and an outer pair of 24C serving the aisles; further down the room are two more pairs of 24Cs as delays, again arranged as inner and outer pairs. The system is powered by two d&b D10 amplifiers.

Absolute installation manager Colin McKendry explains, “In a big, highly reverberant room like this, one of the challenges is to stop reflection off the high ceiling, which can be heard as an annoying echo from above. The standard d&b 24C cabinet has six 4-inch LF drivers and an HF line array, giving us pattern control down below 400Hz. The ‘E’ is an extension to the LF drivers, which sits at the top of the 24C, giving another octave of pattern control, which helps to combat that problem.”

The xC-Series columns are also cardioid in the horizontal. “While a lot of column loudspeakers lose pattern control at around 2.5 kHz, forcing the engineer to EQ out much of the lower frequency information to achieve intelligibility, the cardioid characteristic of the xC-Series extends that horizontal pattern control all the way down to the low frequencies,” McKendry says.

McKeown adds, “The system’s main use is for speech, but also occasionally acoustic music. The d&b system handles it all perfectly: the tonal quality is excellent and the dispersion is very well controlled.”

For control, simplicity was key, with as little user interaction required as possible. An Allen & Heath Qu-Pac mixer is provided, with presets for the various regular services. “Most of the time it’s an automix of the main fixed microphone positions,” says McKeown. “And there is always the capability for full mix control (using the R1 remote control) on an iPad.”

Aside from intelligibility, St. Eugene’s presented another major challenge: building restrictions forbid the fixing of hardware to walls and pillars. The only option was the creation of custom floor-mount brackets. “Again, the appearance was very important,” McKeown notes. “The mounting had to look right in its environment and with the speakers. The brackets couldn’t enclose the rear of the speaker so as not to interfere with the cardioid pattern control, and as there could be no adjustment once it was mounted, the angle of pan for each speaker had to be built into the design of the bracket. Again, ArrayCalc was very useful in achieving this.”

Read More
Celestion Introduces HornWizard App That Serves As A Portal To Company's Horn Design Software

Designed in conjunction with the architect and a specialist engineering company, each bracket is unique to account for floor height and pan angle, and incorporates a plate for mounting beneath the floorboards and a rear cover to hide mounting bolts and cable. The back plate is finished in the same RAL color as the loudspeaker, and the base plate in stainless steel to reflect its surroundings.

“The mounts look like they are part of the speaker – it is a very elegant solution,” McKeown concludes. “We all worked together to identify clear parameters and goals for the system and to tailor the design before installation commenced,” McKeown said. “Having d&b’s support gives us access to skills we may not have in-house, plus a high level of knowledge and experience from all types of projects. We’ve worked with Oran on a number of projects, and his knowledge of electroacoustics is invaluable. It gives the customer a great deal of confidence knowing we have the support of the manufacturer behind us.”

d&b audiotechnik

Church Audio Tech Training Available Through Church Sound University. Find Out More!