Unveiled at the 2010 Winter NAMM show, the new Spectr Audio LS636M is an excellent blend of independent chamber design and high-output drivers.
It is outfitted two 6-inch woofers with 2-inch voice coils and a 3-inch compression driver mounted to a wide coverage waveguide.
The high output and wide coverage of the LS636M means fewer elements are needed to accomplish the necessary SPL and coverage.
The LS636M has three independent chambers for true three-way performance. The chambers are acoustically sealed, allowing each of the three driver sections to work without interference from the others.
The hardware section of the LS636M can be adjusted by 10 degrees in 1-degree increments between elements and 5 degrees in 1-degree increments between element and subwoofer.
Features:
* 120-degree Horizontal Coverage
* High-Efficiency Neodymium Drivers
* 3 Independent Chambers
* Rapid Change Cartridge
* Ergonomic Flying Hardware
* Ground Stackable up to 6 Elements
* Compact and Light Design
* Ultra High-Output Configuration
Specifications:
MF:1 x 6-inch Neo with 2-inch voice coil
LF: 1 x 6-inch Neo with 2-inch voice coil
HF: 1 x 3-inch Neo CD 1.4-inch throat
Coverage (HxV): 120-degree x 10-degree
Frequency Response: 78 Hz – 18 kHz
Max SPL 1m: LF/MF: 126.8 dB HF: 135.8 dB
Max long term SPL: LF/MF: 126.8 dB HF: 135.8 dB
Sensitivity: LF/MF: 97 dB HF: 109 dB
Nominal Power: LF/MF: 150 W HF: 150 W
Continuous Power: LF/MF: 300 W HF: 300 W
Nominal Impedance: LF/MF:8Ω HF:16Ω
Internal Crossover/Biamp: Bi-amp or Tri-amp
Connectors: Dual Neutrik NL4
Finish Options: GigArmor/Textured Paint
Finish Colors: Black | White | Custom
Hardware: Rigging Hardware w/ 10-degree increments
Handles: 2 (1 on each side)
Material: 18mm Calibrated Baltic Birch
WxHxD (inch): 25 inches x 8.4 inches x 11.8 inches
Net Weight: 44 pounds
