RCF has added the 3-way active line source TTL6-A line source to its Touring & Theatre range to serve a wide variety of medium-to-large-space applications; both indoors and outdoors.
The loudspeaker has been engineered to provide the advantages of line array technology, and is equipped with 2 x 12” woofers for bass, 4 x 6.5” midranges and a 2” compression driver with waveguide for directivity. The asymmetrical horn design allows cascading of two TTL6-A for control of the directional characteristics — even in difficult acoustic environments, with increased range.
The TTL6-A contains four channels of 550-Watt digital amplification and the RDNet digital processing. Two independent digital amplifiers 550 Watt each for the low frequencies, 700W for the mid frequency woofers and 400W for the driver deliver output power. Thanks to their efficiency no fans are required.
The 32-bit, floating point DSP manages:
– 3-way system crossover and transducers alignment
– Programmable system equalization
– Input gain reduction
– Soft limiter and gentle compressor for high signal inputs
– RMS current monitoring and transducer protection.
A dedicated processing area is available through the integrated RDNet input board. Remote monitoring, special custom equalizations, high and low pass, solo and mute for each way, and many other options all are available on RDNet. The rear panel features a simple rotary encoder to control all the speaker functions, with a bright 7-segment display to help system set-up, while a simple command from RDNet will totally disable the input panel.
The cabinet itself is made of Baltic birch plywood with every layer glued with a special adhesive; this makes the cabinet completely water resistant. In addition, a special polyurea paint coating of makes it resistant to scratches and bumps.
The internal structure is braced to survive long term use and transportation and the cabinet is further boosted by two die-cast aluminum side handles, with rubber hand-grips which can be used in three different directions to facilitate transportation and loading operations.
With a choice of rigging accessories, and fixing points for rigging hardware, the TTL6-A is easy to handle, fly and install. This versatility makes it suitable for Theaters, Auditoriums, Live Sound, Stadiums, Arenas, Club Systems, Corporate Events, A/V Presentations and Houses of worship.
Key Features include:
RDNet remote and control
Class D quad-amped with 2200 Watt
DSP with low noise converters
2” compression driver, 3.0” voice coil, with a waveguide
4 x 6.0“ midranges
2 x 12“ neodymium woofer
139 dB max. SPL
90° x 30° directivity (+5°, -25°)
Tour grade cabinet and mechanics