The EU 112D, EU 115D and EU 118D are constructed of lightweight 13-layer plywood with a durable Hammer Head polyurethane finish.
The EU 112D and EU 115D have three built-in flying points and a tilt-back design to facilitate use as a personal monitor, while all three models are equipped with pole mounts.
All EU models will be available from authorized Peavey retailers in Q2 2010.
EU 112D and EU 115D:
• 1,000W IPR power amplifier for the low frequencies
• 200W IPR power amplifier for the high frequencies
• 12-inch Neo Black Widow Dual Voice Coil Woofer on EU 112D
• 15-inch Neo Black Widow Dual Voice Coil Woofer on EU 115D
• RX22 titanium compression driver with ferrofluid cooling
• Two-way, bi-amplified active loudspeaker system
• Patented Quadratic Throat Waveguide technology
• Asymmetrical horn aims the sound down to the audience
• Expansion port for input and control modules
• Angled side for use as a floor monitor
• Durable Hammer Head polyurethane finish
• Dual position stand mount adapter
• Rigging points on top, bottom, and back for flying the enclosure
• DDT compression/anti-clipping protection
• DynaQ audio enhancement circuit provides automatic equal loudness compensation and increased audio clarity
• Servo Feedback controlled woofer
• Two independent input channels, with level control and mic/line gain switch
• U.S. MSRP $1199.99 for EU 112D
• U.S. MSRP $1299.99 for EU 115D
EU 118D:
• 1,000W IPR power amplifier
• 18” Peavey Low Rider subwoofer
• Full power handling down to 34 Hz
• Fourth order Linkwitz-Riley crossover with eight discrete low-frequency crossover points
• Bass enhancement circuit
• Crossover in/out switch
• High-pass thru jack
• Compact and lightweight design
• Speaker pole mount
• Heavy-duty steel handles inset on both sides
• Hammer Head polyurethane black finish
• Full-length, perforated steel grille for speaker protection
• Servo Feedback controlled woofer
• U.S. MSRP $1499.99
