Neutrik Americas has announced the introduction of FIBERFOX, a new fiber optic connection system that’s designed to meet the requirements of MIL-DTL-83526 military specifications for use in harsh conditions due to expanded beam fiber optic connectivity that helps in overcoming problems presented by dirty, dusty environments.
The expanded beam fiber optic connectors utilize a lens to expand and accurately align the light emitting from an optical fiber. The aligned light beam is transmitted through an air gap to a mating connector, where the light is collected and focused by a second lens into a second optical fiber to complete the connection. With 50/125 multimode fiber, the expanded and aligned light beam has an active area that is approximately 3,600 times larger than a typical 50 µm multimode fiber core, resulting in an increased percentage of available transmission power with no variation in signal strength over time.
FIBERFOX incorporates both 2- and 4-channel connectors that are IP68 waterproof certified up to a depth of 6 meters (19 feet, 8 inches) both mated and unmated, without a protective cap. The wear-free connectors are stated to be able to withstand 10,000 mating cycles without any maintenance, and no special cleaning or measurement tools are required.
Mating ability is also improved as the 2-channel connectors are compatible with 4-channel FIBERFOX configurations and the 4-channel FIBERFOX connectors are compatible with the 2-channel FIBERFOX system. Additionally, both the 2-channel and 4-channel connectors are compatible with all MIL-DTL-83526 systems.
Further, FIBERFOX briDge hermaphroditic connectors, capable of both front- and rear-mounting, are designed to facilitate easier patching with common LC patch cords. An LC cable can connect directly into the back of the briDge chassis connector, which FIBERFOX briDge fits into the NEUTRIK D-shape cutout.
“The FIBERFOX system represents a dramatic step forward in fiber optic connectivity and signal transmission,” says David Kuklinski Neutrik Americas drector of fiber optic solutions. “Featuring full interconnectivity with standard LC connectors for easy integration with other fiber optic products, the FIBERFOX system is insensitive to dirt or liquids, making it easier to clean, easier to maintain, and remarkably robust in terms of its resistance to dust and dirt. With full MIL-DTL-83526 compatibility, this system makes a great choice for a wide range of markets, including Lighting/Network, PA/Sound, Video, Broadcast, Defense and Government, Railway, and Oil/Gas stations. I’m confident these new products will be well received by system integrators everywhere.”
Neutrik Americas is now accepting quotes for fulfillment in Q2, 2022.
