dB Technologies moves the DVX Series into the integrator marketplace with a passive selection of cabinets for the contactor. Initially, six models will be available in 8”, 10”, 12” and 15” two-way versions, as well as 15” and 18” subwoofer models.
All cabinets feature rear cabinet angle cuts of 20 and 40-degrees for monitor applications. 12 M8-thread rigging points, two side-mount flypins for wall mounting, plus pole mount cup.
Subwoofers feature 2 lateral handles for easy transport, a standard M20 pole mount plate, the predisposition for wheels on the bottom and recesses on the top to facilitate the stacking of 2-way loudspeakers or another subwoofer.
A quick look at the specs on the new models:
DVX P8 – 300 watts@8 ohm. Freq. response: 100 Hz-19 kHz. 125 dB max SPL. 8” woofer with 2” voice coil + 1” compression driver with 1.5” voice coil. 90×70 rotatable horn.
DVX P10 – 300 watts@8 ohm. Freq. response: 90 Hz-19 kHz. 127 dB max SPL. 10” woofer with 2” voice coil + 1” compression driver with 1.5” voice coil. 90×70 rotatable horn.
DVX P12 – 500 watts@8 ohm. Freq. response: 70 Hz-19 kHz. 133 dB max SPL. 12” woofer with 2.5” voice coil + 1.4” compression driver with 2.5” voice coil. 90×40 rotatable horn.
DVX P15 – 500 watts@8 ohm. Freq. response: 70 Hz-19 kHz. 133 dB max SPL. 15” woofer with 2.5” voice coil + 1.4” compression driver with 2.5” voice coil. 90×40 rotatable horn.
DVX PSW15 – 500W@8 ohms. Freq. response: 40 Hz-120 Hz. 132 dB max SPL. 15” woofer with 3” voice coil.
DVX PSW18 – 1000W@8 ohms. Freq. response: 35 Hz-120 Hz. 133 dB max SPL. 18” woofer with 4” voice coil.