Sponsored by

One Of The Most Overlooked Steps Of Recording

Taking time to listen to instruments in the studio prior to recording can make a significant difference in the final product.

By Joe Gilder December 12, 2017

Are you really listening in the studio prior to recording? It can make all the difference... Photo by bark
This article is provided by Home Studio Corner.

When I started recording more seriously, I was spending most of my time in professional studios.

Fancy studios are awesome. You’ve got a pretty control room with a big console, patchbay, and couches.

You’ve got a nice big tracking room, and you’ve probably got a couple of extra rooms or vocal booths thrown in there.

All this is great, however, for those recording in personal studios, chances are the musicians you record are no farther away than the other side of the room.

In the end, most of us don’t have the luxury of multiple recording rooms, vocal booths, etc.

While all those rooms are nice, I found that it’s very easy to fall into a trap. When you’re setting up to record something, you’re running back and forth from the tracking room to the control room, patching mics to preamps, checking levels, etc.

It’s really a lot of fun. Then you turn up the monitors in the control room and start listening to the instrument you just mic’d up.

Let’s say it’s a drum kit, so you’ve got anywhere between 6 and 12 mics on the kit. You go through each mic, one by one, getting a good level, and listening to make sure it’s capturing the sound you want.

Problem: What did we forget to do?

• Set up mics. Check.
• Patch mics into preamps. Check.
• Make sure you’re getting signal from each mic. Check.
• Set preamp gain to an appropriate level. Check.
• Listen to make sure you’re getting a good sound. Check.
• Start recording?? Bzzzz. Wrong.

What did we leave out? What simple little step will make all the difference in the world? Hint: It has to do with your ears.

What is it? We forgot to listen to the instrument. We could waste the next 45 minutes dialing in preamps, EQs, compressors, etc., trying to get the perfect drum sound, when in reality we have no idea what the drums even sound like.

Do you get how important that is? You’re banging your head against the console in the control room, screaming, “Why does the snare drum sound like a flimsy piece of paper!!!??!”

If you took one minute to walk into the tracking room and just listen to the kit, you’d quickly discover the reason. As it turns out, the snare does sound like a flimsy piece of paper. No amount of EQ, compression, or recording voodoo tricks will fix a bad-sounding source.

This may seem like an obvious piece of advice, but it’s still something I forget to do sometimes. I mic up a client on acoustic guitar, and I immediately go throw my headphones on and listen to the sound I’m getting through the mic.

Where what I should do is sit in front of the guitar and listen to what it sounds like.

Once I’m familiar with the instrument, I can then adjust the tools (mics, preamps, processing, etc.) to better capture that sound. But if I forget to listen to the instrument first, it’s like driving blindfolded.

Admit it…

Have you done this before, too? Come on…it’s okay to admit it. Acceptance is the first step to recovery.


About Joe

Joe Gilder
Joe Gilder

Sound Engineer
Joe Gilder is a Nashville based engineer, musician, and producer who also provides training and advice at the Home Studio Corner.

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.