Subwoofer Arrays, Part 3: Simulation Versus Measurement
Summarizing the results of a comparison between simulated and measured data via a field test.
Summarizing the results of a comparison between simulated and measured data via a field test.
Paying as much attention to what comes off the backs of the loudspeakers as what comes out the front.
Investigating what happens to directivity when cardioid subs are placed underneath a stage.
Part 1 of a series looking at different algorithms to optimize the dispersion pattern of subwoofer arrays, evaluating their performance and comparing the results with measurements on a physical array configuration.
Flown or on the ground? If flown, where? Does the situation call for a cardioid configuration? And what about tuning?
A few steps that might help your venture into low frequency territory a lot easier…
Using measurements to get solid answers regarding a topic that may get more attention than it merits.
A look at some of the more common types of sub arrays with modeling graphs that show their horizontal directivities.
Options for routing the game sound to the subs, and then deciding where to place the subs in the room.
Acoustics
Amplification
Audio Networking/IT
Business
Cabling & Interconnect
Church Sound
Dynamic Processing
Electrical Power
Equalization
History & Heritage
Key Audio Principles
Live Recording
Loudspeakers
Microphones
Mixing Consoles
Popular Authors
Production
Profiles
Software Tools & Apps
Sound System Design
Stage Monitoring
Stagecraft & Best Practices
Studio Recording
Subwoofers
System Test & Measurement
Wireless/RF
Copyright 2022 ProSoundWeb · EH Media LLC. All rights reserved.