K-array Domino
k-array.com
Overview: Three models, all with a very slender profile, with options that include the KF212 (12-in), KF210 (10-in) and KF26 (6-in)
Dispersion: KF212 is 90 x 60 degrees; KF210 and KF26 are both 90 x 90 degrees
Power: An onboard passive filter automatically adjusts frequency response and phase response, so any amplifier can be utilized; also, impedance is selectable (4-16 ohms)
Mounting: Wall brackets are included while other tools such as a flush-mount recessing frame to further conceal the loudspeakers are also available
Companion Subs: Several Rumble models (up to 12-in) and Thunder models (up to 21-in)
Of Note: All Domino models have two neodymium drivers coaxially mounted plus a passive radiator to extend bass response in the lower end frequencies
Yamaha Installation Series
usa.yamaha.com
Overview: A very deep line with a wide range of configurations and options, including the IF2112 (choice 12- or 15-in woofer) and several more compact models; three-way models available as well
Dispersion: Numerous options, including several cabinets offering three horn dispersion patterns: 60 x 40, 90 x 50, and 90 x 90 degrees; horns are rotatable
Power: Can be driven by a range of amplifiers, depending on model; the company’s DME series digital mix engines offer customized parameters
Mounting: Cabinets include multiple threaded inserts; U-brackets and array frames are also available; four eye bolts are provided with all models except IF2205 and IF2205W
Companion Subs: IS1112 (12-in), IS1215 (dual 15-in), IS1118 (18-in), IS1218 (dual 18-in)
Of Note: 12- and 15-in two-way models have a selector on the rear panel that allows switching between bi-amp and single-amplifier modes
Alcons Audio V-Series
alconsaudio.com
Overview: Several options include the VR12 (12-in) down to the VR5 (5-in), all with the company’s patented pro-ribbon HF driver
Dispersion: The VR12 is available with 60 x 30 or 90 x 40-degree dispersion; waveguides are “revolvable”
Power: For optimum performance, the VR Series should be driven by the company’s ALC controller-amplifiers (Sentinel3 and Sentinel10)
Mounting: Cabinets include threaded inserts that accommodate a range of mounting option; VR12 available in an “i” (install) version, without handles, stand mount or tilt-point
Companion Subs: Company offers a wide range of models with woofer sizes starting at 12-in (BF, BQ and BC Series)
Of Note: Proprietary Signal Integrity Sensing pre-wiring is designed to provide complete cable/connector compensation between the loudspeaker and ALC to significantly increase response accuracy; VR asymmetrical enclosure design offers flexible mounting (ceiling, wall)
dBTechnologies VIO X
dbtechnologies.com
Overview: Point source models range from the VIO X15 (15-in) to the VIO X205 (dual 5-in); larger models offer stage monitoring angle
Dispersion: VIO X15 and X12 is 60 x 40 degrees, with the X10 at 90 x 40 degrees; horns are rotatable
Power: Active with onboard Digipro G3 amplifier joined by DSP that includes linear phase FIR filters for added intelligibility and clarity
Mounting: Cabinets include numerous threaded inserts that accommodate a range of mounting options; horizontal and vertical wall brackets also available
Companion Subs: VIO S118 and 118R (both 18-in)
Of Note: Onboard presets let users adapt high-pass filters to the chosen application; also equipped with RDNet port allowing monitoring and remote control via Aurora Net software (Windows and Mac)
Electro-Voice EVF Series
electrovoice.com
Overview: A deep line of two-way point source models that includes dual and single 15-in and 12-in models
Dispersion: Numerous options are offered (i.e., 60 x 40, 60 x 60, 90 x 60 degrees. and several others); constant-directivity waveguides are rotatable
Power: Can be utilized with numerous amplifier models, including models from sister company Dynacord IPX Series, L Series with FIR drive and more; Dynacord also provides numerous electronics options such as the new MXE matrix mix engine; can also operate in bi-amp mode
Mounting: Cabinets include numerous threaded inserts that accommodate a range of mounting options, with several accessories also offered
Companion Subs: EVF-1121S (12-in). 2121S (dual 12-in), 1151S (15-in) and 1181S (18-in)
Of Note: Incorporate the company’s latest transducer components; “S” designated systems utilize SMX Series symmetric drive woofers and ND2B 2-in titanium compression drivers; upgraded “D” high-definition systems are equipped with high-performance DVX series symmetric drive woofers and DH7N 3-in titanium compression drivers
DAS Audio ARTEC 500 Series
dasaudio.com
Overview: Two-way point source line that includes the ARTEC-510A (10-in), 508A (8-in), 526A (dual 6-in) and 506A (6-in)
Dispersion: ARTEC-510A is 110 x 50 degrees, other models are 80 x 80 degrees. symmetrical
Power: Active (bi-amplified) with onboard third-generation class D providing (for ARTEC 510A) 360 watts continuous to LF and 180 watts continuous to HF; DSP also onboard for
Mounting: Cabinets include numerous threaded inserts that accommodate a range of mounting options, including adjustable ceiling/truss mount bracket and U-bracket
Companion Sub: ARTEC-S15A (15-in)
Of Note: All models, including subwoofers, also available as standard in white; full-range models incorporate premium M-34 compression driver for HF
Clair Brothers KiT Series
clairbrothers.com
Overview: Two-way point source line that includes the KiT-15 (15-in), KiT-12 (12-in) joined by the unique KiTCurve curved array element (also 12-in)
Dispersion: KiT-15 and -12 are available with 90 x 40 degrees standard and 60 x 40 degrees optional (both rotatable); KiTCurve is 90 x 15 degrees
Power: KiT-15 and -12 are available with switchable active/passive mode or in active-only version; company offers numerous amplification and DSP packages as well
Mounting: Cabinets include proprietary kiT Rigging Corners that accommodate a range of options
Companion Subs: KiT-Sub and KiT-Sub-Mini (both 18-in, available as passive or self-powered)
Of Note: A simplified installation version features only terminal strip input; a weather-resistant (WR) version is available with a water-tight cable pre-installed
EAW MKD Series
eaw.com
Overview: Two-way and three-way point source models with a variety of options and configuration; the company also just announced the new MKD1200 Series
Dispersion: Numerous options are offered (i.e., 120 x 60, 90 x 45, 60 x 45 degrees. and more); horns are rotatable
Power: Passive (can also run in bi-amp mode), company’s UXA Series amplifiers recommended as well as UX Series processors with several proprietary technologies
Mounting: Cabinets include threaded inserts that accommodate a range of options, wall-mount and ceiling-mount brackets also available
Companion Subs: Numerous options offered, ranging from single 12-in to dual 21-in
Of Note: Pair of spaced low-frequency transducers centered around a large-format horn are able to be driven an octave lower through the use of proprietary beamwidth matched crossover technology
