RCF Now Shipping ART732-A And ART735-A Powered Loudspeakers

For nearly a decade, RCF has manufactured the flagship ART 700 Series of two-way polypropylene molded active speakers.

The original series offered 10-inch, 12-inch and 15-inch versions with a one-inch neodymium high frequency compression driver.

Last year, RCF engineering brought to market a unique product in this category with the introduction of the ART745-A featuring a 15-inch low frequency woofer with a 4-inch voice coil high frequency compression driver.

This allowed for the lowering of the crossover point between the transducers to 650 Hz so almost all the vocal range would be produced by the high frequency driver thus better impulse response, fast waterfall decay and superior efficiency.

Now, RCF takes the series one step further with the introduction of the ART732-A and ART735-A.

The 12-inch and 15-inch models feature a 1.4-inch exit, 3-inch voice coil neodymium high frequency compression driver achieving over 130 dB maximum SPL. The low frequency transducers are designed to provide a linear response and a precise, deep low frequency control; and with a crossover point at 900 Hz allows the high frequency transducer to produce a more accurate vocal intelligibility. The CMD matching of the transducers creates one of the most musical cabinets on the market today.

Transducer technology is a key strength to the clarity of sound these cabinets produce.

“All our woofer and subwoofer designs are equipped with large sizes, properly vented inside/outside voice coils,” touts RCF engineering.

This allows for 6-7 dB more output, as well as smoothing out the sound characteristics of the cabinet in long-term performance applications. The inside/outside voice coil design allows for better heat dissipation and provides the best mechanical resistance for accurate sound reproduction. Precision neodymium magnet compression drivers offer advantages in system portability weight along with high frequency clarity with specific attention paid to magnetic circuit polarization for optimum thermal immunity and long-term program handling capability.

Cabinet design and functionality is another reason for the superior performance. The Reddot Design Award winning cabinets are designed to dampen down vibrations even at maximum volume settings. The reflex porting offers better frequency and pattern control. And the cabinets are equipped with ergonomically designed forged aluminum handles with rubber handgrips for portability, as well as equipped with pole mount cup for stand mounting, M10 flypoints for rigging and angle cut on cabinet for use as a floor monitor.

RCF

Leave a Reply

Your email address will not be published. Required fields are marked *