Supported By

Radial Introduces Next-Generation JDI Duplex 2-Channel Direct Box

Smaller for easy handling, incorporates rack-mount option, and adds 3.5mm TRS connector for greater flexibility

Radial Engineering has announced its “latest generation” of the Radial JDI Duplex, a 2-channel direct box designed for professional touring and studio recording.

“The Duplex has gained international stature as the unchallenged champion of the stereo direct box world,” according to Radial senior engineer Dan Fraser. “So before making any changes to update such a legend, we wanted to make sure that we would retain the flexibility, ease of use, build quality and of course, amazing sound. At the end of the day we focused on making it smaller for easy handling, incorporating a rack-mount option and adding a 3.5mm TRS connector for greater flexibility when being used with laptops and tablets.”

The JDI Duplex is a passive direct box that is equally capable of handling low level instruments such as an electric guitar, or the most dynamic instruments, such as a digital piano.

The 100-percent discrete design is centered around two high performance audio transformers that produce an exceptionally linear response from 10Hz to 40kHz and gently smooth out transients for a natural limiting effect that is often referred to as vintage sounding.

An array of connectors including 1/4-inch, 3.5mm, RCAs and XLRs on the input side with XLR outputs enhance versatility.

As with all Radial direct boxes, the Duplex is made with a 14 gauge steel I-beam enclosure to reduce opportunity for stress on the PCB which could shorten the lifespan while providing a protective zone over the switches to prevent misuse or damage. A full bottom no-slip pad provides plenty of stay-put. 

Front panel switches include -15 dB pad, stereo-to mono mix, 180-degree polarity reverse, ground lift and XLR select.

The Duplex starts shipping in late March 2014.

Radial Engineering

Supported By

The Better Way to Connect AV

Dante replaces point-to-point audio and video connections with easy-to-use, scalable, flexible networking. Adopted by hundreds of manufacturers in thousands of professional products, Dante is the de facto standard for modern AV connectivity.