Headphone extensions have been the bane of many a sound engineer’s existence.
The cables on IEMs are never long enough to get from the musician’s head to the Aviom or M-48, which means we need to provide some sort of extension cable.
In the past, I’ve tried buying 1/4-inch headphone extensions and used 1/4-inch to 1/8-inch adapters, but those cheap, off-the-shelf adapters are very stiff and the adapters don’t always work.
Recently, we’ve tried making our own. I found some super-thin cable and put a 1/4-inch TRS on one end with an 1/8-inch cable end on the other. Those worked well; at least until the 1/8-inch ends started failing—which was about week 3.
We then switched to regular cable (Mogami 2792) with a TRS on the PM end, and a locking 1/4-inch cable end with 1/4-inch to 1/8-inch adapter on the other.
We even zip tied a carabiner to the musician’s end so they could clip to to their belt loops. Those work OK, but we’ve still had issues with the adapters (usually the left side cuts in and out).
While walking the trade show floor at WFX, I was tipped off to a possible solution. My friend John David and I had just been talking a few weeks earlier about building a small belt pack with a locking 1/4-inch panel mount connector on the bottom and 1/8-inch panel mount connector on the top.
With some type of belt clip, this would be a perfect solution. We’ve both found panel mount connectors tend to be a whole lot more reliable than cable end connectors.
John David pointed me to the Elite Core booth and said they had made exactly what we had talked about. Sure enough there it was.
It’s a model of simplicity; a roughly 1-inch square box about 3-inch long with a XLRF on the bottom and a 1/8-inch panel mount on the top. A simple spring steel clip attaches the box to your belt. It’s made from an aluminum extrusion with metal end caps and lists for $20. Sold.
You can also buy cables to go with them; they stock 10-foot and 18-foot with a right angle 1/4-inch on one end and the necessary XLRM on the other.
I was told by Chris Ward of Elite Core they went with an XLRM on the cable because you can’t accidentally plug anything into it. That’s good thinking; you don’t want to have to troubleshoot a mic that’s plugged into a headphone output.
This is not a flashy, exciting product. But we’ve been using one on our stage for a few weeks now and the guys love it.
The belt clip holds the pack securely, the cable is flexible and the RA 1/4-inch is neater than the straight ones we used. If you are using Aviom, M-48, MyMix, Momentum, or headphone amps, this is something your musicians will really appreciate. The cost is reasonable, and they are well made. I just ordered 3 more sets.
You can find them at your favorite Elite Core Audio dealer — I got mine from Gear Techs (www.geartechs.com) — or from their online store at www.elitecoreaudiostore.com.
They would make great stocking-stuffers…
Mike Sessler is the Technical Director at Coast Hills Community Church in Aliso Viejo, CA. He has been involved in live production for over 20 years and is the author of the blog, Church Tech Arts . He also hosts a weekly podcast called Church Tech Weekly on the TechArtsNetwork.
