Sponsored by

In The Studio: My Favorite Guitar Amp Miking Technique

There are about as many ways to mike an electric guitar amp cabinet as there are opinions on which music is the best...

By Bobby Owsinski March 18, 2019

Image courtesy of Milada Vigerova

There are about as many ways to mike an electric guitar amp cabinet as there are opinions on which music is the best, but there’s one that’s always been my favorite. The reason is that it provides a lot of versatility in sounds, something that we’re always looking for especially when guitars tracks are stacked.

I’m not sure who taught me this technique but it was something that I saw used a lot when I first came to Los Angeles. It’s pretty easy, but it does depend on specific mics, at least in its original form. Here’s what to do:

1. Place the Shure SM57 slightly off the voice coil and then add a Sennheiser MD 421 at the same position to the right of the 57, at a 45-degree angle pointing toward the voice coil.

2. A surprising variety of sounds can be achieved from this setup by using one mic or the other, summing them both at different levels, or by flipping the phase on one of them.

3. Many engineers today prefer to use a Royer R-121 instead of the 421, but they usually place it straight into the cone or on a different speaker instead of at a 45-degree angle to the 57. While that will work well and provide the additional warmth that comes with using a ribbon mic, it doesn’t quite get you the same versatility. Try using the angle and see what I mean.

4. Some engineers add a 3rd mic about 6 feet back from the cabinet to add some room and to capture some of the low frequencies that develop away from the speaker. Usually this is a large diaphragm condenser. If the room doesn’t sound particularly good or is too reflective this might not work well though.

Obviously there are dozens of techniques, but that little 45-degree angle from a second mic can add more than you think from the variety of just a couple of mics.

You can read more from The Recording Engineer’s Handbook and my other books on the excerpt section of

About Bobby

Bobby Owsinski
Bobby Owsinski

Music Industry Veteran and Technical Consultant
Bobby Owsinski is an author, producer, music industry veteran and technical consultant who has written numerous books covering all aspects of audio recording. To read more from Bobby, and to acquire copies of his outstanding books such as The Recording Engineer’s Handbook, be sure to check out his website at


Have something to say about this PSW content? Leave a comment!

Scroll past the ”Post Comment” button below to view any existing comments. Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.