Study Hall
Sponsored by
Audio Technica

Microfiles: Shure Model 55—The History Of A True Classic

Details on one of the most iconic microphones of all time.

By Craig Leerman May 20, 2019

The Shure 55SW (Image courtesy of tookapic)

Ask any person on the planet to think of a vintage microphone, and the Shure Model 55 is what probably comes to mind.

This iconic mic was introduced in 1939, and two models that sport the distinctive box shape are still in the Shure catalog. Pretty good for a design celebrating more than 75 years!

Not only is the Model 55 one of the best looking mics ever made, it also introduced a breakthrough technology in using just a single dynamic element and achieving pattern control.

Up to that time, attaining anything other than an omnidirectional pattern meant using more than one diaphragm and combining their outputs. This resulted in a large mic head that usually didn’t sound all that good because the elements were spaced apart and usually had different frequency responses.

The author’s 1946 Shure Model 55 on a vintage Snyder desk stand.

Shure developed the mic element in the 1930s, using small ports that allowed sound waves to reach both sides of a diaphragm at different times, resulting in a more linear frequency response.

The design is called UNIDYNE (short for Unidirectional Dynamic), and it’s a basis of many designs today, including another icon, the SM58.

The element of the Model 55 was also suspended on springs dampened with foam to isolate the diaphragm from handling noise.

The combination of great sound, compact size, cardioid pattern and classic styling made the Model 55 an instant hit. By the 1950s, it was so recognizable that a company advertisement simply featured a picture of the mic and copy reading “Used the World Over More Than Any Other Microphone” and “The Microphone That Needs No Name.”

The King & Mic

The Model 55 has changed over the years. When introduced it came in three types: the 55A, optimized for 35-50 ohm low impedance; the 55B, built for 200-250 ohm systems; and the 55C, designed for use with high impedance equipment. The next year, a new broadcast version offered an isolation mount called the model 555.

The broadcast version became the 556 in 1947, and the three types were replaced with a single model that featured a multi-impedance selector switch at the rear of the mic head.

Several variations over the years, including, left to right, 55 “Fathead, 55S, 556S broadcast, 55SH Series II, Super 55.

In 1951, a smaller 55 hit the market, offering improved isolation of the cartridge and a wider frequency response. It was available as the 55S standard and the 556 shock mount broadcast version. The larger 55 was discontinued the following year.

By the way, the larger model is commonly referred to as the “Fatboy” while the smaller model picked up the moniker of the “Elvis” microphone, memorialized on a commemorative postage stamp (with “The King”) that was issued by the U.S. Postal Service in 1993.

The springs and foam used to isolate the UNIDYNE element in the 1946 model.

The head shape of the smaller 55 has remained the same, but the base eventually changed to a more modern design with a built-in XLR connector. (Earlier models had used the three pin Amphenol-type connector.) By the late 1970s, the multi-impedance switch was gone, with only a low-impedance version available.

While the inner workings were periodically upgraded to improve sound quality, the most visible change was to the material lining the housing behind the grill.

The silk lining material started as reddish-brown, then was changed to blue silk, and then to black silk, with later models switching from silk to black or blue foam.

The standard finish was satin chrome, but the mics were also available for a time with a gold finish.

Currently, two models are available as new. The 55SH Series II has a cardioid pattern, an on/off switch, and black foam behind the grill, while the Super 55 offers a supercardioid pattern, no switch, and blue foam. Both offer the latest iteration of UNIDYNE technology.

I had wanted a Model 55 ever since I started playing music, and found my first one at a swap meet several years ago. This early 1940s Fatboy 55C had been used with a ham radio rig and was considered too dated and bulky by the previous owner.

The three-pin connector on the 1946 Model 55, as well as the built-in stand mount and three-position impedance switch.

It usually sits on my desk, one of only three mics on display at my house.

My most recent model is a modern Super 55 that is part of my working inventory, providing a cool vintage look with modern sound pickup.

Shure Model 55B “Fatboy” Specs

Transducer Type: Non-metallic diaphragm dynamic
Polar Pattern: Cardioid
Frequency Response: 40 Hz – 10 kHz +/- 10 dB
Sensitivity: -74 dB at 600 ohms
Nominal Impedance: Switchable, 200-250 ohms
Size: 7.7 x 3.2 x 3.5 inches
Net Weight: 2.7 lbs
Retail price for a new one in 1940: $26.46

Read more of Craig’s Microfiles articles here.


About Craig

Craig Leerman
Craig Leerman

Senior Contributing Editor, ProSoundWeb & Live Sound International
 
Craig has worked in a wide range of roles in professional audio for more than 30 years in a dynamic career that encompasses touring, theater, live televised broadcast events and even concerts at the White House. Currently he owns and operates Tech Works, a regional production company that focuses on corporate events based in Reno.
http://techworksreno.com/

Comments

Have something to say about this PSW content? Leave a comment!

Scroll past the ”Post Comment” button below to view any existing comments. Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Marco C. van der Hoeven says

Listed price for a 55B was $45 (as well as for the 55C, and $42.50 for the 55A). In 2014 a jubilee replica was made: the 5575 in a limited edition of 5575. The replica is not perfect since the two large screws at the back are omitted and the capsule is a modern Unidyne 3.

Tom Passamonte says

Great article! Thank You.I have been aware of these mics since I was a kid.My Dad was a professional singer,and had a couple of these.Wish I still had them.I do own three of the modern ones. A 55 with the Black foam,a Super 55 with the Blue foam,and a Black Matte finish model.All of these models sound great ,and I get a lot of people coming up to me on my gigs,asking about my mic.People are fascinated with these.It's really nice to see an article like this.Thank you again.

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.