Live Sound
Sponsored by
Powersoft

American Utopia: Behind The Scenes On A Technologically Challenging Tour

Backstage with John Chadwick and Pete Keppler as they wrangle an almost entirely wireless concert tour for David Byrne.

By Phil Garfinkel December 10, 2018

Members of the David Byrne American Utopia tour prior to a show, left to right, Jamie Nelson (RF tech), John Chadwick (monitor engineer), Pete Keppler (front of house engineer), and Jeff Wuerth (system engineer). (Credit: Jeff Wuerth)

Wrangling RF channels is always a challenge and every tech’s “pal,” Mr. Murphy, is always standing by to lend a hand. With spectrum shrinking and demand increasing, challenges abound. Add touring to the mix and it becomes a challenge not for the faint of heart.

Imagine having to wrangle 20 channels in a new town and venue every night on a tour. It hardly seems like a utopia, right?

Then consider this: the David Byrne American Utopia tour, which just wrapped in late November, carried 66 channels of wireless, using 53 of them a night. The band played pretty much the same set every night – a mix of current material, Byrne’s solo work and collaborations, and some Talking Heads classics.

At a stop in Portland, OR, I visited the engineers and investigated what makes this tour tick. Stage duties were handled by John Chadwick while Pete Keppler mixed front of house.

Between the two of them, they have decades of road experience, Chadwick with Luis Miguel, Steven Tyler and Aerosmith, Judas Priest, and most recently with The Anderson, Rabin, and the Wakeman version of Yes. Keppler has been at FOH for many notable acts as well, including Katy Perry, Bonnie Raitt, Patti Smith, Nine Inch Nails and the late, legendary David Bowie.

The stage set was quite striking, with 119 by 27 feet of aluminum hook and loop chain hung around three sides of the stage. Chadwick says, “The stage itself is totally free from cables, speakers, stands, risers or lights. The stage floor gets covered in a soft, light gray Marley and it’s remarkable how large a 55-by 32-foot stage looks and feels without any traditional backline on it. We don’t use any guitar, bass or keyboard speakers anywhere, even offstage.”

“No cables at all?” I ask.

Chadwick responds, “If you look really hard you’ll spot a pair of audience mics offstage on either side. These use good old XLR cables that are routed offstage. We have two 14-way multipair cables going to two racks all of six feet from monitor world. One goes to the Kemper rack for guitars and bass. The other cable goes to the keyboard rack located right next to the Kemper rack to give us eight keyboard inputs. There’s also one AC backline power drop to supply the two racks.”

Doing The Homework

It’s an obvious assumption that so much metal hanging around the stage would have some negative effects on the many wireless channels in use. It took a lot of testing and brainpower to get it right. Chadwick explains, “We spent a few days in August of 2017 with the chain hung ‘in situ’ and the RF gear we were planning on using. After some high-level methodical myth-busting we determined that the chain does attenuate the RF signal significantly.

The tour featured deployment of copious quantities of wireless mic and monitoring systems.

“Our experiments proved that putting the antennas above the stage and inside the chain gave us better results onstage but was slightly detrimental to the signal offstage left. For an indoor venue this isn’t so much of an issue as there are helpful reflections to fill in the gaps. Outdoors, the band are all aware that there is the slightest chance that there may be the occasional drop while they are offstage left before the show starts but the onstage will be rock solid. I should add that this only seems to apply to the in-ear systems. The (Shure)Axient D (digital) is just ridiculous. We have line checked with all the drum gear set up in the back of the truck at a couple of festivals.”

They carried 48 channels of Shure Axient D wireless, deploying 42 of those channels on a daily basis, with all but four running in high-density (HD) mode. There were two transmitters for bass guitar, five for guitars and five more for vocals, 30 for drum/percussion microphones, and four served various talkback needs or are supplied to the opening act.


Read the rest of this post

1
2
3


About Phil

Phil Garfinkel
Phil Garfinkel

Phil Garfinkel lives in the U.S. Pacific Northwest. Among the many highlights of his audio experiences, hearing Claudia Engelhart mix Bill Frisell at “Jazz at Lincoln Center” is high on his personal Top 10 list.

Comments

Have something to say about this PSW content? Leave a comment!

Scroll past the ”Post Comment” button below to view any existing comments. Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Lisa Nielsen says

Thanks for the information. I saw this tour in forest hills. The behind the scenes details were a great addition to this memorable tour.

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.