Loudspeakers
Sponsored by
Meyer Sound

Danley Sound Labs Introduces Weatherized OS-12CX Loudspeaker

Full-range enclosure utilizes patented Synergy crossover design, Sentinel limiter protection circuitry, and stainless steel mounting hardware.

By PSW Staff March 13, 2018

The Danley OS-12CX

Building on the continued success of the fully-weatherized Danley OS-80 & OS-90 loudspeakers and the OS-115 subwoofer, Danley Sound Labs introduces the Danley OS-12CX.

Like its siblings, the OS-12CX is built to withstand punishing rain, heat, and freeze/thaw cycles season after season after unrelenting season. The Danley OS-12CX uses Danley’s patented Synergy crossover design, Sentinel limiter protection circuitry, and stainless steel mounting hardware that is prepared to brace the OS-12CX against mother nature’s worst.

“The Danley OS-12CX is a compact, yet powerful box for smaller outdoor installations like small- to mid-sized sports venues, water parks, and cruise ships, as well as for larger distributed outdoor installations or as fill for end-fired systems,” says Mike Hedden, president and founder of Danley Sound Labs. “Its 90-degree coverage pattern drops off with Danley’s characteristic steepness, and all the sound within the beam is even, flat, and perfectly phased. Plus, at only forty pounds, the OS-12CX is easy to move around.”

The Danley OS-12CX boasts a frequency response that is +/-3dB from as low as 69Hz to as high as 21.7kHz using a single 12-inch coaxial driver. It is rated at 400 watts continuous and 1600 watts peak and is capable of delivering 121dB SPL continuous and 127dB SPL peak. Its dimensions are approximately 30 inches tall by 26 inches wide by 11 inches deep. In addition, the Danley Sound Labs Centinel Protection Circuit is on both high and low frequencies.

Danley Sound Labs

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.