
Inside Loudspeaker Sensitivity: What’s A Watt Anyway?
Shedding some light on the sensitivity specification and how it may translate to the real world performance of a loudspeaker system…
Shedding some light on the sensitivity specification and how it may translate to the real world performance of a loudspeaker system…
Illustrating the harmonic structure (content and phase relationship) of a signal
Taking a deeper look into the effects of crossover filters on overall loudspeaker response.
While it’s sometimes possible to measure a multi-transducer loudspeaker system as a single full-range device, these measurements may be limited in their use.
Useful information in determining the correct acoustical position and phase response of a loudspeaker system
Determining amplifier size so that a given loudspeaker may achieve a target SPL at a specified distance…
The process should typically entail three primary items
Demystifying an overlooked tool that can be used to yield a more linear phase response
Most loudspeaker systems have a limited excursion capability. The voice coil and cone assembly can travel only so far
Measuring impedance at typical application drive level and illustrating some possible uses will be of benefit
A simple procedure for matching the output of a DSP to a target transfer function
There’s a lot of cause and effect that sometimes gets overlooked, resulting in less than optimum performance…
Church Audio Tech Training Available Through Church Sound University. Find Out More!