Architectural Acoustics By Peavey Debuts PHR Series Ceiling Loudspeakers

Architectural Acoustics by Peavey introduced the new PHR Series loudspeakers, designed specifically for compact, in-ceiling operation in permanent installations, at the 2009 InfoComm show in Orlando.

The Architectural Acoustics PHR Series ceiling-mount enclosures are designed to provide high-intelligibility voice, program music and versatile signal reproduction in commercial, industrial and institutional applications.

A tap selector switch allows for easy system tuning and configuration for 70-volt or 100-volt distributed systems, and a full selection of taps up to 60 watts (model dependent) and an 8- ohm transformer bypass setting are included for maximum system versatility.

The UL-compliant enclosure is constructed of high-impact, injection-molded plastic and includes a press-fitted grille design that blends well with contemporary architecture. PHR Series enclosures are housed in steel backing cans and include two color-coded, screw-locked flying leads in a wiring chamber to allow for easy system wiring and daisy-chain wiring to additional PHR enclosures.

A C-shaped backing plate support and tile bridge brackets are included.

PHR 860
• 8-inch woofer with a 1.2-inch voice coil, polypropylene cone and rubber surround
• ¾-inch soft-dome tweeter
• Power handling: 90W (thru mode); transformer taps 60W, 30W, 15W, 7.5W, 3.75W (70V), 100V capable
• Frequency response: 80 Hz to 20 kHz, +/- 4 dB
• Crossover frequency: 4 kHz
• 91 dB SPL (8 ohms nominal mode)
• UL compliant
• Outermost diameter: 12.44-inch
• Overall depth: 11.3-inch
• Cutout diameter: 11-inch
• 12.5 lbs.

PHR 860S Sub
• 8-inch woofer with a 1.2-inch voice coil, polypropylene cone and rubber surround
• Power handling: 100W (thru mode); transformer taps 60W, 30W, 15W, 7.5W, 3.75W (70V),100V capable
• Frequency response: 55 Hz to 100 Hz, +/- 6 dB
• Crossover frequency: 120 Hz
• 89 dB SPL (8 ohms nominal mode)
• UL compliant
• Outermost diameter: 15.75-inch
• Overall depth: 12.75-inch
• Cutout diameter: 14-inch
• 14.5 lbs.

PHR 630
• 6.5-inch woofer with a 1-inch voice coil, polypropylene cone and rubber surround
• ¾-inch soft-dome tweeter
• Power handling: 50W (thru mode); transformer taps 30W, 15W, 7.5W, 3.75W, 1.9W (70V),100V capable
• Frequency response: 90 Hz to 20 kHz, +/- 4 dB
• Crossover frequency: 4 kHz
• 89 dB SPL (8 ohms nominal mode)
• UL compliant
• Outermost diameter: 10.2-inch
• Overall depth: 8.6-inch
• Cutout diameter: 8.8-inch
• 7.6 lbs.

PHR 410
• 4-inch woofer with a 1-inch voice coil, polypropylene cone and rubber surround
• 1-inch duo-dome polymer tweeter with phase plate
• Power handling: 40W (thru mode); transformer taps 10W, 5W, 2.5W, 1.25W, 0.63W (70V),100V capable
• Frequency response: 115 Hz to 13.5 kHz, +/- 4 dB
• Crossover frequency: 4 kHz
• 86 dB SPL (8 ohms nominal mode)
• UL compliant
• Outermost diameter: 7.9-inch
• Overall depth: 7.87-inch
• Cutout diameter: 6.57-inch
• 4.6 lbs.

Architectural Acoustics By Peavey Website

(Be sure to visit PSW’s 2009 InfoComm New Product Gallery.)

Read More
Studio Haifax Deploys CODA Audio For Socially Distanced Concerts At Pop-Up Theatre In Belgium

Leave a Reply

Your email address will not be published. Required fields are marked *

Church Audio Tech Training Available Through Church Sound University. Find Out More!