The proprietary “SignalIntegritySensing” pre-wiring of the LF and MF sections ensures a fully dynamic cable/connector compensation between the LR24 and Sentinel, resulting in a fast and tight mid and bass response, regardless of impedance or cable length, while also reducing distortion even further (system damping factor >10.000).
The LR24 has a linear frequency response from 51 Hz to 20 kHz (-3 dB). Low-end control can be extended by the LB24 double-12-inch bass array extension with the same cabinet footprint. The horizontal dispersion of 80-degrees is maintained down to 190 Hz. The vertical dispersion enables a maximum cabinet splay angle of 6 degrees, still maintaining complete wavefront coherency without any disruption or lobing up to 20 kHz.
The system is to be exclusively driven by four channels of the proprietary Alcons Sentinel 10kW amplified loudspeaker controller. Through the integrated (steering) processing and feedback, the ALC offers LR24-specific drive processing with optimal response, directivity, reliability, and user-friendliness.
To insure utmost reliability, each Alcons transducer design must pass a rigorous 1000-hour test at maximum (clip) levels.
The rigging system enables angle-setting on the cabinets without lifting the array. This results in faster set-up times with minimal handling. The flying system supports different ways of array assembling, per single cabinet or 4-cabinet pre-rig, and is certified for 24 cabinets in a 10:1 safety ratio.
The LR24 is an element of a complete, application-configurable package, including the LB24 bass array extension, BC543 triple-18-inch cardioid subwoofer, Sentinel amplified controller, ARC 3D-simulation tool and system connection, and transport logistics.
The new LR24 is part of “The Ribbon Network” inventory, the Alcons global hire and partner network, and it comes with a 6-year “no hassle” warranty.
