ProSoundWeb's NAMM 2020 Coverage Provided By RCF

Adam Hall Group Premiering New Audio & Production Products At NAMM 2020

New LD Systems loudspeakers, Palmer monitoring devices, Gravity stands and more.

At the upcoming NAMM 2020 show in Anaheim, the Adam Hall Group will be presenting various new audio, lighting and stage products at its booth (#11613). The roster includes:

LD Systems MAUI 44 G2 Active Column PA
This new active column PA system is driven by an amplifier rated at 1,500 watts (RMS) to help in delivering stated maximum SPL of 130 dB. A cardioid design fosters more controlled dispersion in the low-mid frequencies. In combination with a second subwoofer, the low-end can also be operated in a cardioid configuration.

The subwoofer module houses a 15-inch neodymium woofer, while the vertical array system consists of a total of 12 3.5-inch neodymium drivers along with four HF drivers coupled to a BEM-optimized waveguide designed to provide a homogeneous dispersion pattern. Proprietary DynX DSP technology minimizes distortion at even maximum volumes. In addition, aptX and AAC coding is intended to provide high-definition full bandwidth audio over Bluetooth, and the integration of TrueWireless Stereo technology enables wireless stereo sound from two MAUI 44 G2.

LD Systems ICOA Series
Active coaxial loudspeakers (12- and 15-inch models are offered) for full-range, satellite and monitor applications, with a rotating, BEM-optimized CD horn as well as the DynX DSP presets. ICOA models can also be used both vertically as a satellite and horizontally as a stage monitor. BT versions enable wireless Bluetooth streaming to play entire songs or backing parts from a smartphone or tablet. Cabinets include four aluminum handles with ergonomic rubber surface. A range of accessories are available for installation and transport.

Palmer BC 400
A 19-inch battery charger controlled that can handle up to 16 AA or AAA batteries at the same time, including a combination of each. Charging stations for two 9-volt blocks are available as accessories and can be combined as needed with the AA/AAA charging stations. The charger monitors the charging status of each individual battery, identifies defective batteries, and protects against overcharging and short-circuiting. The built-in multi-voltage power supply facilitates worldwide use.

Palmer Monicon XL
The flagship of the Monicon series is a monitor controller with a correlation meter that displays the phase difference between the left and right channel of a stereo signal, helping to reveal mono compatibility errors in a mix. Analog audio circuitry means no latency when monitoring. Streamlined over two levels, the central control and display elements are inclined towards the user to facilitate more flexible positioning on tables and fosters comfortable working.

Palmer STUDIMON 5
An active 5-inch monitor in a compact bass reflex design that can not only be used in the studio, but also integrated into other audio environments. XLR inputs and a volume control join the bass reflex port on the rear panel.

Gravity Touring Series
Designed to provide optimum stability and high functionality these stands offer “unloseable” metal knobs and efficient securing of the boom with a half turn.

Models include the TMS 4321 B microphone stand with standard boom, TMS 4322 B mic stand with telescope boom, and the TSP 5212 LB steel loudspeaker stand with Auto Lockpin.

Adam Hall Group

NAMM 2020 Top Stories

ProSoundWeb's NAMM 2020 Coverage Provided By RCF

Experience RCF!

ACC North Booth #18110 - Demo Lounge 203B
Loudspeaker System Showcase