By PSW Staff • March 11, 2014 The new 10MC500 from Beyma Beyma has introduced the new MC500 family of ferrite-magnet woofers, available in 10-, 12-, and 15-inch sizes, primarily designed for active loudspeaker systems and line arrays as mid-range or low-frequency components. All three models—10MC500, 12MC500 and 15 MC500—incorporate 2.5-inch voice coils with ceramic magnet as well as Maltcross technology, Beyma’s propietary cooling system, which allows them to handle up to 1,000 watts of program power while dramatically reducing loss due to power compression effect. Further, MC500 models offering large displacement (8mm Xmax) while remaining very sensitive and linear in a wide band (above 97 dB 1w/1m). Key specs for the 10MC500: Nominal impedance—8 ohm Minimum impedance—5.7 ohm Power capacity—500 W AES Program power—1000 W Sensitivity—97 dB 1 W @ 1 m @ ZN Frequency range —60-5000 Hz Voice coil diameter—63.5 mm 2.5 in BL factor—18.2 N/A Moving mass—0.044 kg Winding length—19.5 mm Air gap height—9.5 mm Xdamage pp—40 mm Total weight—13.42 pounds Beyma Comments Leave a Reply Cancel reply Your email address will not be published. Required fields are marked *Comment Name * Email * Website Tagged with: Beyma Drivers Loudspeakers Musikmesse New Products · all topics Subscribe to Live Sound International Live Sound International brings you information on a wide range of pro audio topics. Stay up-to-date, get expert tips, industry news, new products and technologies delivered. Discover how to make smart use of today’s sound technology, Subscribe Today!