Study Hall
Sponsored by
Audio Technica

Tech Talk: Meaningful Audio Metering

What is this thing really telling me?

By Pat Brown January 24, 2014

Is your audio gear operating in the optimum part of its dynamic range? Does excessive noise or occasional distortion plague your system? Does it become difficult during a long, loud event to discern the loudness of the system, forcing you to keep a sound level meter handy to avoid excess levels?

All of these problems can be solved with an audio meter. Here’s a look at some of the major meter types as well as what they are for.

A number of standards exist for the response characteristics of the meters used by audio products. The two major types are the Volume Indicator (VI) and the Peak Program Meter (PPM). The VI is often referred to as a VU meter, since the meter indication is the Volume Unit or VU.

In today’s audio world it is getting increasingly difficult to find a meter that adheres exactly to a standard. This doesn’t mean that the meter isn’t useful, it just means that one can’t be completely certain of what they are monitoring when they observe it.

I try to check the characteristics of meters every chance I get, just to get a feel for what is out there in the market place.

Volume Indicator
The reading on a VI tracks the loudness component of the signal, which is approximately related to the Root-Mean- Square (RMS) voltage at the output of the device.

This is a vital piece of information to the system operator, not only because it relates to loudness, but because it also relates to the applied power to the loudspeaker. The visual monitoring of a properly calibrated VI can prevent loudspeaker thermal damage and excessive sound level to the audience.

An analog volume indicator (VU meter).

The zero reference on a VI is typically +4 dBu and the range is -20 dB to +3 dB. Since the meter is blind to peaks due to its slow response time (300 ms), a peak LED may be included. The VI is a live sound operator’s best friend, because it gives them visual feedback as to the loudness of the system that can be trusted when the ears become fatigued.

Peak Program Meter
The reading on a PPM tracks the peaks of the audio waveform, but not quite. The true peaks can exceed the indicated peak by up to 8 dB. The meter’s ballistics were designed to ignore very short term peaks for which clipping would not be audible. PPMs are useful for getting the full, usable audio level out of a device.

A “quasi” PPM.

There are several flavors, each having a different scale, but on sound reinforcement mixers meter zero is typically around 1 VRMS and levels up to +16 dB are indicated. They are blind to loudness due to their short integration time.

True Peak Program Meter
Peak monitoring is especially important when making a recording, where it is necessary to avoid clipping of the signal. True PPM’s usually have 0 dB at the top of the scale, with meter zero indicating clipping of the waveform. The response time is instantaneous (practically) so clipping of even very short term peaks is indicated.

Software WAV editors and digital audio workstations often include True PPMs. While quite useful in recording applications, where the objective is to completely avoid clipping, in the world of live sound some short term clipping is typically inaudible, and even unavoidable at high sound levels.

Read the rest of this post


About Patrick

Pat Brown
Pat Brown

Principals, Synergetic Audio Concepts
Pat & Brenda Brown lead SynAudCon, conducting audio seminars and workshops online and around the world. For more information go to


Leave a Reply

Your email address will not be published. Required fields are marked *

Tagged with:

Subscribe to Live Sound International

Live Sound International brings you information on a wide range of pro audio topics. Stay up-to-date, get expert tips, industry news, new products and technologies delivered.

Discover how to make smart use of today’s sound technology, Subscribe Today!

Latest in Uncategorized