Study Hall
Sponsored by
Audio Technica

Simulating A Live Drum Solo In The Studio

Hear and see a step-by-step process of adding a studio recorded drum solo to a live recorded track

By Bruce Bartlett August 7, 2014

Suppose you just recorded a band in a club to create a live album.

A few days after the gig, the drummer asks, “Can I play a drum solo in your studio, and have you add it to the album? I want it to sound “live”, as if I played it at the gig.”

This happened to me. We recorded a drum solo in the studio, then edited it onto the beginning of one of the live-recorded songs. People listening to the final CD thought that the solo was part of the set.

I’ll offer some suggestions on how to simulate a live, in-the-venue drum solo after the fact.

The techniques described here also apply to overdubbing other musical parts in the studio to replace flawed live performances.

Here’s the basic procedure:
1. In the studio, try to duplicate the miking setup that you used live. Match the microphone models and placement.
2. Record the instrument in a dry, neutral studio if possible.
3. Then add some artificial reverb that sounds like the live venue’s reverb. Set the reverb parameters to re-create your memory of the venue’s reverb time, degree of warmth, and so on.
4. Enhance the tracks with EQ, gating and compression as needed.
5. Add crowd noise and applause.

I put some mp3 samples of the recorded drum solo in this article so you can click on them and hear the results. If your playback stutters, right-click the samples to download them first, then play them.

The Finished Mix
Let’s listen to the studio-recorded drum solo after it has been enhanced to sound “live”.

As you can hear, we added some crowd reaction and reverb to the dry studio tracks in order to simulate a live recording.

(click to enlarge)

Here is a screen shot of the drum-solo tracks. From top to bottom, the tracks are
• Kick
• Snare
• Overhead left
• Overhead right
• Rack tom
• Floor tom
• Audience reaction, left and right mic signals
• A different audience reaction, left and right mic signals

There’s also a reverb plug-in inserted into a stereo bus. The snare and toms have sends to that reverb bus.

Read the rest of this post


About Bruce

Bruce Bartlett
Bruce Bartlett

Recording Engineer
AES and SynAudCon member Bruce Bartlett is a recording engineer, audio journalist, and microphone engineer. His latest books are “Practical Recording Techniques 5th Ed.” and “Recording Music On Location.”


Leave a Reply

Your email address will not be published. Required fields are marked *

Aaron Johnson says

Great article!  I think this helps with applying eq, Comp, gate, and FX to live drum mixing technique as well.  I really appreciate hearing the steps taken.  It conveys what was done very well with the screen shots.  Thanks!

Frank77 says

We have a great drummer in our village and he is playing drums in his garage quite frequently. I must say that the sound is absolutely awesome. He has many audio buffers there, maybe their are making that sound I don’t know. I will print this article and show it to him. Thanks a lot!
Regards, Frank from cheap accutane

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.

Latest in Studio