Study Hall
Sponsored by
Audio Technica

Dave Rat Transmission: Sometimes Sound Is About Time

Time - a subject that seems to perplex even the most savvy of the professional audio community

By Dave Rat August 24, 2015

How fast do sound signals travel through the various parts of the sound system? Do sound signals travel faster in analog snake cables or fiber optic cables?

Also, what about transmission through the air with wireless mics? And where do the true and relevant sources of time lag exist in a audio system?

What I find really interesting is that sound signal travels at differing speeds depending on whether it’s in the form of electricity, or sound waves in air, or via wires, or passing through various pieces of commonly used audio equipment.

Consider that in 1.2 milliseconds of time:

– Sound travels about 16 inches in air before going into a microphone or after coming out of a loudspeaker.

– But if we did rock shows under water, we would find that sound cruises about 70 inches, nearly five times faster.

– It just barely makes it from the input XLR to the output XLR of the faster popular digital consoles.

– Yet it travels about 650,000 feet (124 miles) down a regular copper wire or snake, because in copper, electric signals travel about two-thirds the speed of light.

– It travels about a million feet (186 miles) down fiber optic cable; however, it can take about 630 microseconds (over half of our 1.2 milliseconds) to be converted from analog audio to digital light (and vice versa) at each end.

– But if the analog audio signal is already digitized prior to the fiber optics system, the conversion time can be cut to about 10 microseconds.

– You could probably string together every piece of analog gear you and everyone you know have ever owned plus the entire analog inventory in the Rat Sound warehouse, and experience virtually no time lag. (Analog does not delay much at all.)

– It takes more time for sound to travel one inch from a singer’s lips to the mic than it takes for a wireless transmitter to convert sound to RF, transmit it 75 feet to a wireless receiver, and then send it through an analog console, compressors and EQ, and then convert it back to RF via an in-ear monitoring system and get it all the way to the little speakers in the singer’s ears.

As noted above, sound moves through analog gear so fast that it can be considered instantaneous for most purposes, while digital is a bit more confusing because sound makes several stops for conversion between analog and digital.

Further, once signal is inside a piece of digital gear, it can slide behind in time further as processing is added the signal path, unless the manufacturer has implemented compensating delays that lock the delay time at the maximum processing time.

What does this all mean?


Read the rest of this post

1
2
3


About David

Dave Rat
Dave Rat

President, Rat Sound Systems
 
Dave Rat heads up Rat Sound Systems (www.ratsound.com), a leading sound reinforcement company based in Southern California, and has also been a mix engineer for more than 30 years.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.

Latest in Uncategorized