Study Hall
Sponsored by
Audio Technica

A Beginner’s Guide To Audio Connections

Sure, you think you're starting to get a handle on this whole audio thing, but what's with all the different connections?

By Bruce Bartlett August 30, 2012

This article is provided by Bartlett Microphones.

 
An audio system has so many cables and connectors, it’s easy to become confused.

What plugs into what?

This article will help you sort out the various types of audio cables and connectors.

Cables are assemblies of wires; they carry electric signals from one audio component to another.

Connectors link together to form a temporary path for the signal to flow from one component to another.

Cable Construction

Audio cables are usually made of one or two insulated conductors (wires) surrounded by a wire-mesh shield which reduces hum.

Outside the shield is a soft plastic or rubber insulating jacket (Fig. 1).

Cables are designed to carry signals that are either balanced or unbalanced.

Fig. 1. Cutaway view showing the parts of a cable for balanced signals

Cables For Balanced And Unbalanced Signals

A cable for a balanced signal (Fig. 1) uses two conductors to carry the signal, surrounded by a shield.

An cable for an unbalanced signal has a single conductor surrounded by a shield (Fig. 2). In this case, both the center conductor and shield carry the signal.

An example of a cable for balanced signals is a mic cable.

Fig. 2. Cutaway view showing the parts of a cable for unbalanced signals.

An example of an cable for an unbalanced signal is a guitar cord. A cable for a balanced signal (Fig. 1) is usually called a balanced line.

A balanced line rejects hum better than an unbalanced line, but an unbalanced line under 10 feet long usually provides adequate hum rejection and costs less.

Signal Levels
A cable carries one of these four signal levels or voltages:

• Mic level is a weak signal. A microphone puts out a mic-level signal. It’s typically about 2 millivolts or .002 volt.

• Instrument level is a fairly weak signal. An electric guitar or synth puts out an instrument-level signal. It’s about 50 millivolts, or .050 volt.

Fig. 3. A 1/4” phone plug

• Line level is a moderately strong signal. An electronic device puts out a line- level signal. Some electronic devices are a mixer, recorder, effects device, and a mic preamp Geek speak: In unbalanced equipment, line level is 0.316 volt (also called – 10 dBV). In balanced equipment, line level is 1.23 volts (also called +4 dBu).

Fig. 4. A 1/4” phone jack

• Speaker level is a strong signal. A power amplifier produces a speaker-level signal. It’s about 1 to 1000 watts, or about 3 to 90 volts.

Cable Connectors And Chassis Connectors
Some connectors are part of cables; they are called cable connectors. Other connectors are built into equipment chassis; they are called chassis connectors.

Cable connectors mate with (plug into) chassis connectors. Several types of connectors are used in audio. We’ll describe them on the following pages.


Read the rest of this post

1
2
3


About Bruce

Bruce Bartlett
Bruce Bartlett

Recording Engineer
   
AES and SynAudCon member Bruce Bartlett is a recording engineer, audio journalist, and microphone engineer. His latest books are “Practical Recording Techniques 5th Ed.” and “Recording Music On Location.”
http://www.bartlettaudio.com

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Frank99 says

That’s definitely a perfect guide for the beginner. If I would have something like this post when I was beginning… Everything would be easier for me. That’s why I highly recommend to read this one for everyone who is trying to start his work with audio connections.
Regards, Frank from generic viagra without prescription

brad000143 says

Information system degree programs focus on applying computers to business problems. The curriculum includes course work in business, accounting, computer programming, communications, 640-801 |    640-863 |    642-681 |    HP0-S27 |    000-104 |    000-152 |    JN0-562 |    ST0-096 |

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.

Latest in HOW!