ADVANCED SEARCH

Articles Tagged Smaart

  • Sunday, December 30, 2007
    Transcript: Smaart Impulse & Phase Measurement
    image
    PSW Staff 12/30/07 11:22 AM, 0 Comments
    Question posted by Patrik Arnekvist on September 17, 2001 I know there’s a lot of Smaart experts here so here goes a thought. When using the delay locator, Smaart assumes that the right delay setting is at the highest peak of the waveform. At low frequencies - is that really the right thing to do, I mean the “waveform” starts at a zero energy level..or? At 40 hz, there is some time between zero and top of the impulse. (Does… View this story
    Filed in: Live Sound • Forum • Study Hall • Loudspeaker • Mixer • Software

  • Monday, October 22, 2001
    Transcript: Using Smaart with Jamie Anderson
    PSW Staff 10/22/01 01:33 PM, 0 Comments
    Moderator: (Dave Dermont) Good evening and welcome to our chat with Jamie Anderson of SIA Software Company. Jamie, could you give us some background about what you did before SIA, for those of us too lazy to read the bio? Jamie: I’ve got an EE (electrical engineering) degree from Worcester Polytechnic Institute (WPI), a Masters of Fine Arts (MFA) from Yale Department of Drama, and then spent six years at Meyer Sound as SIM and technical support manager. This was… View this story
    Filed in: Live Sound • Study Hall • Measurement • Software