Sign up for ProSoundWeb newsletters
Subscribe today!

Articles Tagged Radial Engineering

  • Tuesday, May 17, 2016
    image
    PSW Staff 05/17/16 09:08 AM,
    Radial Engineering announces the Jensen Twin-Servo 500 series preamplifier is now shipping. According to Jensen’s chief technology officer Bill Whitlock: “When Deane Jensen first put his mind to building the finest microphone amplifier possible, the development process began with the now famous 990 op-amp. “Part of the magic was maximizing the gain-margin so that no matter what the input, the lowest possible distortion would be realized. The unique design essentially cruises along in Class-A mode and then transitions to Class-AB… View this story
    Filed in: RecordingNewsProductProcessorStudio

  • Monday, May 09, 2016
    image
    PSW Staff 05/09/16 07:41 AM,
    Radial Engineering announces the mPress and Exo-Pod press distribution system in now shipping. The mPress is a new press audio distribution system that offers near unlimited signal expansion without degradation or noise. According to Radial’s senior engineer Dan Fraser: “The traditional press box has always been presented as a suitcase with a mic input and a host of mic outputs. In the past, transformers performed the task of splitting the signal and providing isolation against hum and buzz caused by… View this story
    Filed in: AVNewsProductAnalogAVRemote

  • Wednesday, April 27, 2016
    image
    PSW Staff 04/27/16 01:37 PM,
    Radial Engineering announces the BT-Pro is now shipping. The BT-Pro is a Bluetooth direct box designed to capture the wireless transmission from a Bluetooth enabled device and convert the signal to a balanced line for use in a PA system. According to Radial president Peter Janis: “It seems that today, Bluetooth wireless technology is everywhere. You can connect your phone to your car, your laptop to your house and tablet to your TV. It only makes sense that Bluetooth wireless… View this story
    Filed in: AVNewsProductAVInterconnectSignalWireless

  • Thursday, April 07, 2016
    radial engineering
    PSW Staff 04/07/16 01:54 PM,
    Radial Engineering has announced the Headlight-Pro, a unique direct box designed to handle multiple instruments on stage. The Headlight-Pro begins with a standard 1/4-inch input for acoustic guitar, mandolin, fiddle or bass. (It will also work well with many other instruments.)  A muting footswitch is provided to silence the switcher when connecting or disconnecting an instrument. The signal is then routed to a selector footswitch that sequences across four outputs allowing each instrument to have its own dedicated channel on… View this story
    Filed in: Live SoundChurch SoundNewsProductAnalogEngineerInterconnectSound ReinforcementStageTechnician

  • Thursday, March 17, 2016
    image
    PSW Staff 03/17/16 10:53 AM,
    Radial Engineering announces that the MR5 is now shipping. The MR5 is a MIDI signal translator that allows you to use a MIDI controller to control the JX44, JX42 or any other Radial products that use the JR5 footswitch. The MR5 converts the MIDI data stream from the controller to the same data format used by the JR5, allowing the musician to handle instrument and amplifier switching with a sequencer, control pedal or any other MIDI control setup. The MR5’s… View this story
    Filed in: AVNewsProductAVProcessorStage

  • Tuesday, February 16, 2016
    image
    PSW Staff 02/16/16 10:22 AM,
    Radial Engineering announces the Shotgun is now shipping. The Shotgun is a guitar-signal distribution amplifier that is able to drive up to four amps simultaneously without introducing the hum and buzz that is typically encountered due to ground loops. According to Radial Tech Department specialist Ryan Juchnowski: “Radial has always been known as a solution-based company. A few months ago we had the opportunity to visit with the stage techs that manage Colin James and Joe Bonamassa’s guitar rigs. Colin’s… View this story
    Filed in: AVNewsProductAVInterconnectManufacturerProcessorSound ReinforcementStage

  • Monday, January 25, 2016
    radial engineering
    PSW Staff 01/25/16 03:21 PM,
    Radial Engineering has introduced the DiNET DAN-TX and DiNET DAN-RX, both Dante-enabled direct boxes. The Di-NET DAN-TX stereo direct box is equipped with 1/4-inch, RCA and stereo 3.5mm input jacks, allows users to connect instruments or line level sources directly to networked audio systems using the Dante protocol. The DAN-TX has 24-bit/96 kHz analog to digital conversion, and a local 3.5mm headphone output provides the means to quickly test audio. The DiNET DAN-RX is a 24-bit/96 kHZ digital to analog… View this story
    Filed in: Live SoundRecordingChurch SoundNewsProductDigitalEthernetInterconnectNetworkingSignalSound Reinforcement

  • Thursday, January 21, 2016
    image
    PSW Staff 01/21/16 10:51 AM,
    Radial Engineering announces the Shotgun, a guitar-signal distribution amplifier that is able to drive up to four amps simultaneously without introducing the hum and buzz that is typically encountered due to ground loops. According to Radial Tech Department specialist Ryan Juchnowski: “Radial has always been known as a solution-based company. A few months ago we had the opportunity to visit with the stage techs that manage Colin James and Joe Bonamassa’s guitar rigs.” “Colin’s set up is wired in mono,… View this story
    Filed in: AVNewsProductAVInterconnectManufacturerSound ReinforcementStage

  • Thursday, December 31, 2015
    image
    PSW Staff 12/31/15 08:35 AM,
    Radial Engineering announces another award to add to its list, having been selected the winner of the 2015 British Columbia Export Award in the Digital Media & Entertainment Category. Awarded by the Provincial government and the BC Division of Canadian Manufacturers & Exporters trade and industry association, Radial was among over 400 nominated businesses being considered for 12 award categories. This is the first nomination and win for Radial for a BC Export Award. Radial president Peter Janis accepted the… View this story
    Filed in: AVNewsAVBusinessManufacturer

  • Monday, December 28, 2015
    image
    PSW Staff 12/28/15 10:57 AM,
    Primacoustic (a division of Radial Engineering) announces .(JavaScript must be enabled to view this email address) as the newest member of the Primacoustic business development and technical support team for Canada. Bolomey was born in Chile, migrated to Australia and has lived in Canada since 2007. He brings several years experience as an audio engineer and live sound tech to the position, having worked in theater productions and for two major cruise lines. He’s also worked as a sales manager and technical specialist. According to… View this story
    Filed in: AVNewsAVManufacturer



Audio Central