Sign up for ProSoundWeb newsletters
Subscribe today!

Forums Presented By: 

Articles Tagged Infocomm

  • Tuesday, July 28, 2015
    image
    PSW Staff 07/28/15 08:57 AM,
    At the recent InfoComm15 exhibition in Orlando, the OCA Alliance exhibited its “OCA MicroDemo”, a “demonstration product” to prove that OCA – a common remote control and monitoring language for digital audio networks – can run in lightweight hardware environments. Developed jointly by OCA member companies Focusrite, Attero Tech, and Bosch, the circuit board was being shown on the alliance booth at the exhibition. Speaking for the OCA Alliance, technology manager at Focusrite Audio Engineering, Simon Jones, who is involved… View this story
    Filed in: AVNewsProductAVBusinessDigitalInterconnectProcessor

  • Wednesday, July 01, 2015
    image
    PSW Staff 07/01/15 08:23 AM,
    Eminence introduces two new lightweight neodymium compression drivers: the 1.4-inch exit N314T-8 and 2-inch exit N320T-8. Their 3-inch titanium diaphragms feature a geodesic rib pattern for increased stiffness, while their polymer surrounds utilize their new D3 technology (Damped Diametric Drive) to provide an extended response while still allowing a low crossover point. “Think of putting your finger on a bell.” states senior design engineer, Matt Marcum. “Our new Damped Diametric Drive technology accomplishes a similar feat by reducing spurious dome… View this story
    Filed in: AVNewsProductAVLoudspeakerManufacturerSound Reinforcement

  • infocomm
    PSW Staff 07/01/15 07:35 AM,
    InfoComm 2015, the annual conference and exhibition for the professional audio-visual market held in June in Orlando, was visited by a record 39,105 professionals attending from more than 108 countries. This represents a 5.6 percent increase in attendance over InfoComm 2014 in Las Vegas. “InfoComm is the ideal place to make AV purchasing decisions, connect with contacts and learn principles that will boost your effectiveness,” states David Labuskes, CTS, RCDD, executive director and CEO of InfoComm International. “The industry strongly… View this story
    Filed in: AVLive SoundFeatureBlogProductSlideshowAVBusinessEducationManufacturerSound ReinforcementSystem

  • Tuesday, June 30, 2015
    image
    PSW Staff 06/30/15 10:50 AM,
    Auralex Acoustics showcases its range of acoustical isolation products for construction, providing contractors with comprehensive solutions for room isolation in both new construction and remodeling. Five products in particular are essential tools for contractors to achieve the most solid acoustical isolation performance: Mineral Fiber Insulation, SheetBlok Sound Isolation Barrier, RC-8 Resilient Channel, U-Boat Floor Floaters and StopGap Acoustical Sealant. The best way to tighten up a room’s sound, and make it more soundproof in the process, is to design it… View this story
    Filed in: AVNewsProductAVInstallationMeasurementSound ReinforcementStudio

  • Monday, June 29, 2015
    image
    PSW Staff 06/29/15 08:21 AM,
    d&b audiotechnik introduces two further additions to the company’s new generation amplifier family. The 10D and 30D amplifiers are specifically designed to drive permanent solutions. Amnon Harman, CEO d&b audiotechnik said: “For d&b, 2015 is the Year of Installation: we are delivering on our installation product promises, engaging even more closely with our customers and addressing the market on its own terms, particularly with our pricing.” The new installation amplifiers were on display at the d&b booth alongside the new… View this story
    Filed in: AVNewsProductAmplifierAVInstallationManufacturerProcessorSound ReinforcementSystem

  • Thursday, June 25, 2015
    image
    PSW Staff 06/25/15 11:13 AM,
    Harman’s Crown Audio announces it has adopted the Common Amplifier Format (CAF) for DriveCore Install (DCi) Series Amplifiers. Developed by SynAudCon, the CAF is a report for presenting specifications and measured performance metrics of audio power amplifiers. Effective July 2015, Crown DCi Series amplifier specifications will be available in the CAF. CAF was designed to provide amplifier performance metrics in a concise and well-defined format and in a manner that facilitates direct comparisons between various manufacturers and models. At the… View this story
    Filed in: AVNewsAmplifierAVBusinessManufacturerMeasurementSound Reinforcement

  • image
    PSW Staff 06/25/15 09:55 AM,
    Yamaha Professional Audio has announced the early summer 2015 release of the new ProVisionaire App for iPad available via download on iTunes. The app provides a fully customizable control interface for the MTX and new MRX processor to meet the needs of individual commercial spaces such as conference rooms, retail stores, restaurants, banquet halls, and more. The processors are part of the Yamaha Commercial Installation Solutions (CIS) Series. Multiple control pages and levels allow installers to provide their customers with… View this story
    Filed in: AVNewsProductAmplifierAVDigitalInstallationManufacturerProcessorSoftwareSound Reinforcement

  • Wednesday, June 24, 2015
    image
    PSW Staff 06/24/15 09:06 AM,
    The new Yamaha TF series digital consoles make their InfoComm debut in the Yamaha Professional Audio booth at InfoComm 2015. The TF Series offers re-imagined mixing and advanced features along with Yamaha reliability at an affordable price point to an even wider range of users. Aimed at new users and experienced live sound professionals, the TF series brings time-saving capabilities, such as fast, accurate gain setup, single step compression and EQ, and microphone specific presets to even the most modest… View this story
    Filed in: Live SoundNewsProductAVConsolesDigitalManufacturerMixerMonitoringProcessorSignalSound ReinforcementStage

  • image
    PSW Staff 06/24/15 08:01 AM,
    d&b audiotechnik introduces its newest four channel, 2 RU amplifiers. The 10D and 30D are the first d&b amplifiers tailored for permanent integration. They offer the predictable results and rider friendliness of d&b products, with features and costs tailored for installation applications. The 10D and 30D deliver 700 W and 1600 W per channel respectively and share the same Digital Signal Processing (DSP) platform and capabilities as the d&b D20 amplifier and the flagship D80. These amplifiers all provide d&b… View this story
    Filed in: AVNewsProductAmplifierAVInstallationManufacturerProcessorSound Reinforcement

  • image
    PSW Staff 06/24/15 07:36 AM,
    At the recent InfoComm 2015 show in Orlando, Harman’s JBL Professional highlighted the release of Version 5 preset support for the VERTEC DrivePack DP-DA input module for all fullsize, midsize and compact powered VERTEC models (VT4889ADP-DA, VT4888DP-DA, VT4887ADP-DA) and subwoofers (VT4880ADP-DA, VT4882DP-DA, VT4881ADP-DA). Bringing together V5 DSP technology and the DP-DA (DrivePack Digital Audio) input module, this new update refines horizontal coverage, tonal balance and sound quality through the use of sophisticated multi-stage limiting and phase linearization. JBL’s V5 DSP… View this story
    Filed in: AVLive SoundChurch SoundNewsProductAVDigitalLine ArrayLoudspeakerManufacturerProcessorSignalSoftwareSound ReinforcementSubwoofer





Sponsored Links