Sign up for ProSoundWeb newsletters
Subscribe today!

Articles Tagged Celestion

  • Tuesday, January 20, 2015
    PSW Staff 01/20/15 08:28 AM,
    Celestion has announced the launch of the CDX07-1075, a new 3/4-inch exit, neodymium magnet compression driver, and it will be on display at the upcoming 2015 NAMM Show at the Anaheim Convention Center, booth 4674. With a 0.75-inch copper clad aluminium voice coil driving a polyimide diaphragm, the device is rated to deliver 15 watts (rms) power handling and 109 dB sensitivity across a frequency range of 1,500 to 18,000 Hz. Recommended minimum crossover frequency (at 12 dB/octave) is 2.5… View this story
    Filed in: AVLive SoundNewsProductAVLine ArrayLoudspeakerSound Reinforcement

  • Friday, January 16, 2015
    PSW Staff 01/16/15 03:18 PM,
    Celestion has announced the introduction of the new FTX range of common magnet motor coaxial loudspeakers, and they’ll be on display at the upcoming 2015 NAMM Show in Anaheim at booth 4674. Coaxial loudspeakers offer a full-range frequency response in a single self-contained driver and by concentrically aligning low and high frequency drivers, act as more of a “single source” that can provide improvements in signal alignment and off-axis response when compared to a traditional two-way system. Celestion’s FTX range… View this story
    Filed in: AVLive SoundChurch SoundNewsProductAVLine ArrayLoudspeakerSound ReinforcementSubwoofer

  • Friday, March 14, 2014
    PSW Staff 03/14/14 08:13 AM,
    Celestion announced the launch of the CDX14-3030; a new 1.4-inch exit, ferrite magnet compression driver at the Prolight+Sound/Messe in Frankfurt. (Hall 8.0, Stand J78) With a 3-inch copper clad aluminum voice coil driving a titanium diaphragm, the device delivers 75 watts (RMS) power handling and 106.5 dB sensitivity across a frequency range of 500 Hz to 18 kHz. Recommended minimum crossover frequency (at 12 dB/octave) is 1 kHz. According to Celestion head of engineering Paul Cork, “This compression drivers bring… View this story
    Filed in: AVLive SoundNewsProductLine ArrayLoudspeakerSound ReinforcementSubwoofer

  • Thursday, March 06, 2014
    PSW Staff 03/06/14 01:14 PM,
    Celestion is celebrating its 90th anniversary this year. The company reaches this landmark as one of the world’s leading supplier of premium guitar speakers and, after shipping almost half a million compression drivers in the past 12 months, a leading professional audio component suppliers. Celestion was founded in 1924, designing and building loudspeakers for the radio market. In 1932, a permanent magnet moving coil loudspeaker with greatly improved sound quality (compared to existing technologies) was developed and patented. By 1946,… View this story
    Filed in: AVLive SoundChurch SoundNewsAVBusinessLoudspeakerManufacturerSound Reinforcement

  • Monday, January 14, 2013
    PSW Staff 01/14/13 12:41 PM,
    Celestion will be unveiling new additions to its next-generation CF Series of high-end ferrite magnet drivers at the upcoming Winter NAMM show in Anaheim (booth 4676). The new 18-inch, cast aluminum frame, ferrite magnet, low-frequency drivers are well-suited to use in high-end, professional sound reinforcement. The CF1830E is designed to be a multi-purpose loudspeaker driver for reflex, scoop bass or horn-loaded subwoofers as well as a bass unit in a large multi-way system. The CF1830E hass a 3-inch/75mm multi-layer voice… View this story
    Filed in: AVLive SoundNewsProductAVLoudspeakerSubwoofer

  • Friday, April 27, 2012
    PSW Staff 04/27/12 10:52 AM,
    Celestion has announced the appointment of Electric Factory as its new distribution partner for Australia. Based in Victoria, Electric Factory is a leading importer and distributor of musical instruments and professional audio equipment. Representing a wide-ranging portfolio of leading brands, they are committed to providing high quality products supported by exceptional levels of customer service. Electric Factory will be distributing Celestion’s entire range including HF compression drivers and LF cast aluminium and pressed steel chassis drivers for pro audio applications,… View this story
    Filed in: AVLive SoundNewsPollAVBusinessLoudspeakerManufacturerAudio

  • Monday, March 26, 2012
    PSW Staff 03/26/12 01:59 PM,
    Get more of the latest news from the 2012 PL+S show.   Celestion announces the introduction of TF1530SL, the first of a new type of “reduced weight” ferrite magnet, pressed steel LF driver.  This 15” loudspeaker delivers 300Wrms power handling and 98dB sensitivity. It also boasts a significantly lower weight than many standard 15” ferrite magnet LF drivers currently available.  The design of TF1530SL uses sophisticated FEA (finite element analysis) techniques to make the most efficient use of the magnet… View this story
    Filed in: AVLive SoundRecordingChurch SoundNewsPollInstallationLoudspeakerSound ReinforcementAudio

  • Monday, March 22, 2010
    Celestion CDX11445
    PSW Staff 03/22/10 01:47 PM, 0 Comments
    United Kingdom loudspeaker manufacturer Celestion has released several new products at Prolight + Sound 2010. These include the CDX1-1445, a 25mm/1-inch exit compression driver, the DX14-2420, a low profile 35mm/1.4-inch exit compression driver, and the NTR21-5010JD, a bass/sub-bass driver. The CDX1-1445 features a 35mm/1.4-inch diameter voice coil, provides 20-watt power handling and delivers 106dB sensitivity over a frequency range of 1500-20,000Hz. The CDX14-2420 includes a 60mm/2.4-inch diameter voice coil featuring 70-watt power handling and capable of delivering 106.5dB sensitivity over… View this story
    Filed in: Live SoundNewsAmplifierAVBusinessLoudspeakerMonitoringSound ReinforcementSystemAudio