SR/Live Sun, November 23, 2008

Sound Reinforcement/Live Sound | SR News |

Lectrosonics Wireless Utilized In Production Of U.S. Navy’s Air Support

Air Support, a new presentation currently in production by the United States Navy for use at naval air shows, recruitment efforts, and other promotional activities, captures the sounds of Navy SEALs emerging from the water, jets taking off from aircraft carriers, as well as the dialog that accompanies these activities, requires some special production know-how.

LA-based Farr Out Productions, which has provided film and TV production support since 1996, was contracted to provide location sound services for Air Support. According to Scott Jason Farr, sound mixer, DP (Director of Photography), and the owner of Farr Out Productions, “While the aircraft carrier to be depicted in the final product is the USS Nimitz, production actually took place aboard several different aircraft carriers off the Baja, California coast. In addition to working in a highly congested RF (radio frequency) environment aboard an aircraft carrier—with all its radar, radio, and other equipment—there was also seawater, JP4 jet fuel and exhaust, and countless other conditions that made this project very difficult.”

“Because of these conditions,” continued Farr, “I knew my Lectrosonics MM400C miniature transmitters—with their water resistant design—would be the best possible choice, so I used five of them along with five Lectrosonics UCR411A receivers. I’ve always found the UCR411A’s to be very capable at identifying open, available frequencies, so with all the electronics aboard the various ships in the battle group, including the aircraft carriers, AWACS (Airborne Warning and Control System), and submarines, I knew they were right for this job.”

Air Support begins with a group of SEALs emerging from the water (via a submarine) onto a beach, where they crawl through the sand to avoid detection. They make their way to an isolated spot, at which point they provide surveillance of a remote airstrip. After a plane lands, they witness contraband being off-loaded into a warehouse. Upon reporting this activity to the command post, the camera tracks the communication among various military personnel aboard the aircraft carrier, the loading of a bomb onto an F/A-18 Hornet fighter jet, the launch of the jet, and the eventual destruction of the warehouse—after which the Seals retreat.

“I don’t believe any other transmitter would have been able to handle that type of working environment,” notes Farr. “When we were on the aircraft carriers, there was a tremendous amount of ocean spray from the high seas and wind, as well as RF from the radar systems. Between the water and the RF conditions, the Lectrosonics gear handled this really well and enabled me to capture a wide variety of sounds. In addition to the Voice Technologies VT506 lavalier mics I used with the transmitters, I also used custom cables that enabled me tap to into the Navy’s communications system. All of this was recorded to an Aaton Cantar X2 field recorder.

“My client was very happy because we captured a wide variety of really terrific sounds,” he continues, “many of which they previously had to Foley (real-time studio sound effects) to achieve. Lectrosonics’ Digital Hybrid Wireless technology produces “cabled” sound quality and much of their gear also provides backward compatibility with legacy equipment—both from Lectrosonics as well as other equipment manufacturers. I provide a lot of consulting services to my various clients, and the only wireless systems I recommend are Lectrosonics. Their performance and backwards compatibility are key features that really separate the company’s products from the competition.”

Air Support is slated to start airing this September at U.S. Navy air shows.

For more information:
Lectrosonics Home Page
Lectrosonics Wireless Series Page
Farr Out Productions Web Site