Article

Wednesday, February 08, 2012

Indiana Officials Issue Safety Violations For State Fair Stage Collapse

The Indiana Department of Labor today cited concert and event production company Mid-America Sound Corp. of Greenfield, IN with three safety violations in the collapse of an outdoor stage at the Indiana State Fair last August just prior to a show by the country band Sugarland. Seven people died and 58 were injured after the stage collapsed when a gust of wind toppled equipment that hung over the stage.

CBS News also reports that Mid-America Sound Corp. has been issued a $63,000 fine, being the company that provided the stage rigging and chose the workers to erect it.

“The evidence demonstrated that the Mid-America Sound Corporation was aware of the appropriate requirements and demonstrated a plain indifference to complying with those requirements,” Commissioner Lori Torres stated in the report.

The department also issued a small fine against the Indiana State Fair Commission for “failing to conduct proper safety evaluations of its concert venues,” and the International Alliance of Theatrical Stage Employees (IATSE) Local 30 also came under fire, accused of five workplace violations.

Sugarland was not penalized, with the agency noting that the band didn’t employ the workers and wasn’t responsible for building the stage.

One stagehand, Nathan Byrd, was among those killed in the collapse. At least nine other union members were injured.

Further investigations are ongoing. The State Fair Commission has also hired Thornton Tomasetti, an engineering firm based in New York City, to investigate the rigging collapse, while Indiana Governor Mitch Daniels has hired Witt Associates, a public safety and crisis management consulting firm, to conduct a “comprehensive, independent analysis.”

The CBS News report is here.

One of many videos of the stage collapse is here.

{extended}

Allen & Heath iLive For Revitalized Islington Assembly Hall In London

The reopened Islington Assembly Hall in London has selected an Allen & Heath iLive digital mixing system, comprising iDR-48 and iDR-32 MixRacks with two iLive-T112 Control Surfaces, to manage both front of house and monitors.

Originally opened in 1930, the fully refurbished 800-capacity Hall was reopened in 2010 having fallen into disuse for nearly 30 years. The venue now hosts a busy rota of live music, as well as a vast range of events from conferences and parties to vintage fashion events.

“We chose iLive for several reasons,” explains Dan Turner, events operations manager at Islington Assembly Hall. “First, it sounds great and much better than many other digital desks out there. Allen & Heath clearly spent a lot of time getting the preamps right.

“It’s also an incredibly versatile system in the way it works, and pretty much any input or output can be configured to do what you need it to do. I have mainly used analog desks in the past, and iLive almost feels like it is one as the design is more hands-on than menu driven. This helps you get to grips with the beast a lot more quickly than with other digital desks where features can be hidden in layered menus and thus almost useless in the live environment.”

The venue refurbishment plans did not include the installation of a mixing desk, and as such, no multi-core was installed.

“The beauty of this digital system is that to increase the number of available channels all we need to do is use a larger mix rack, there’s no need to dig up the floor to install a cable. Having the mix rack on stage and the control surface at the rear of the hall connected by a single Cat-5 cable was a big selling point,” continues Turner. “We needed an elegant solution to stage monitoring using as few cables and as little space as possible. Using two iLive systems connected together we have achieved this. All signals are routed to where they need to go without the need for active splits on the floor saving valuable space”

The venue also installed Electro-Voice XLE181 line arrays with additional front fills and subs, and Martin Audio monitors on stage.

“Overall, the system sounds fantastic and will enable us to meet all the challenges that our varied events calendar will throw at us!,” concludes Turner.

Allen & Heath

{extended}

Tannoy Unveils VLS Series Passive Column Array Loudspeakers

Tannoy has introduced the VLS Series passive column array loudspeakers offering a balance of performance and cost, when active beam-steering may neither be required nor affordable.

The VLS Series is the first Tannoy product to incorporate FAST (Focused Asymmetrical Shaping Technology), which delivers unique acoustic performance benefits. Central to this is its asymmetrical vertical dispersion, gently shaping the acoustic coverage towards the lower quadrant of the vertical axis. By the nature of a typical application, an “ideal” column loudspeaker should be biased in the vertical plane, toward the audience and away from reflective surfaces above (like ceilings) which are detrimental to intelligibility.

FAST also facilitates quicker, easier installation with less need for tilting or specific concern for optimal mounting height. Mounting is handled via supplied wall brackets.

Tannoy has packaged this performance in a slender and narrow profile, aesthetically refined, powder-coated aluminum chassis with curvilinear aluminum grille. Each model is available in either black or white as standard, with custom RAL finishes available at additional cost and lead-time.

Three models are available – VLS 7 (7 × 3.5-inch LF) designed for speech-only applications, VLS 15 (7 × 3.5-inch LF with 8 × 1-inch HF) and VLS 30 (14 × 3.5-inch LF and 16 × 1-inch HF), both of which are designed for more demanding full-range applications as well as speech.

All are IP64 rated for dust and water ingress and are salt spray and UV resistant as well as subject to rigorous high/low operational temperature and humidity testing.

Specification is aided by the addition of an exclusive Tannoy edition of EASE Focus v2.0 software, allowing systems to be designed with predictable results, along with the ability to specify VLS Series in conjunction with Tannoy’s existing column loudspeakers – including I Series and QFlex.

Tannoy

{extended}

Hosa Technology Mogan Elite Omni Earset Microphone Now Shipping

Hosa Technology has announced that the new Mogan Elite omni earset microphone, the newest addition to the Mogan brand of subminiature microphones, is now shipping.

The Mogan Elite earset mic is outfitted with a moisture-resistant, 2.5 mm omni-directional capsule with -45 dB nominal sensitivity that is designed to be positioned farther from the user’s mouth.

Delivering full-frequency audio performance (20 Hz – 20 kHz) and high gain before feedback, this microphone provides a natural, resonant sound quality.

The new mic also offers an innovative earpiece designed to be worn comfortably for extended periods. With a fleshy ear cushion concealing its fully adjustable, sprung-steel (stainless) mechanism, the mic feels natural when worn over one’s left or right ear.

An interchangeable cable system allows connection of the mic to most popular wireless transmitters, including models from Shure, AKG, Sennheiser, and Audio Technica. Each mic ships with a detachable, Kevlar-reinforced cable with a hardwired connector.

The new Mogan Elite Omni Earset Microphone is available in either beige or black to blend with a variety of skin tones. Additionally, each unit includes a foam windscreen and a single mic clip. The entire package ships in an impact-resistant, compression-molded neoprene zippered case.

Jonathan Pusey, Hosa Technology director of sales and marketing, states, “The Mogan Elite earset microphone delivers impressive performance, enabling this microphone to be right at home in a number of high-end applications, including broadcast and theater, in which audio performance is critical. In addition to world-class audio quality, the Elite earset mic is very comfortable to wear and may be worn without distraction for hours on end.

“The earpiece is highly adjustable and the boom mechanism facilitates precise positioning of the microphone’s capsule. I am quite confident the Elite earset will be right at home in a number of demanding audio environments.”

MSRP for the Mogan Elite omni earset mic is $400.

Hosa Technology

{extended}

Enter The PSW Sweepstakes To Win An Audio-Technica Microphone Or Headphones

Enter to win an Audio-Technica microphone or headphones in the first PSW Sweepstakes of 2012.

ProSoundWeb is giving away three Audio-Technica 50th Anniversary Limited Edition products each month in January, February and March.

Specifically, for each drawing, we’re giving away:

1st prize - AT4050/LE Multi-Pattern Condenser Microphone
—Special 50th anniversary edition in silver-colored metallic finish with etched-on serial number and carefully crafted wooden carrying case
—Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
—Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
—The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
—Three switchable polar patterns: omni, cardioid, figure-of-eight
—Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
—State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
—Switchable 80 Hz hi-pass filter and 10 dB pad
—Custom shock mount provides superior isolation
—Valued at $995.

2nd prize - ATM25/LE Hypercardioid Dynamic Instrument Microphone
—Exclusive 50th anniversary edition in silver-colored metallic finish with serial number etched on the surface
—Ideal for kick drum, toms, and other highly dynamic instruments
—Handles very high SPL at close range
—Big, warm low-frequency response with excellent presence
—Multi-level grille and rugged construction
—Offers very full sound on close-up vocals and dialogue
—Corrosion-resistant contacts from gold-plated XLRM-type connector
—Rugged, all-metal design and construction for years of trouble-free use
—Valued at $489

3rd prize - ATH-M50s/LE Professional Studio Monitor Headphones
—Special 50th anniversary edition in silver-colored metallic finish
—Exceptional audio quality for professional monitoring and mixing
—Collapsible design ideal for easy portability and convenient storage
—Proprietary 45 mm large-aperture drivers with neodymium magnet systems
—Closed-back cushioned earcup design creates an outstanding seal for maximum isolation
—Adjustable padded headband for comfort during long mixing/recording sessions
—Single-sided straight cable terminates to gold-plated mini-plug with screw-on 1/4-inch adapter
—Valued at $209

Go here to enter the latest PSW Sweepstakes. Note that entrants are asked to register to receive the ProSoundWeb Daily e-newsletter.

{extended}

Tuesday, February 07, 2012

Rat Sound Deploys L-Acoustics KARAi At Orange County’s Galaxy Theatre

Orange County’s 40-year-old Galaxy Theatre changed ownership back in August and has now undergone a significant metamorphosis into two separate live performance spaces: the intimate 350-capacity Constellation Room and much larger Observatory, which can accommodate an audience of over 1,000.

One of the primary improvements made to the venue in the process was the installation of L-Acoustics KARAi line source arrays provided by Certified Provider Rat Sound Systems of Camarillo, California.

Jon Reiser, along with business partner Courtney Michaelis and a third silent partner, are the team behind transforming the Galaxy from a lackluster aging venue into an edgy hipster hangout that consistently attracts some of the brightest up-and-coming acts like Foster the People, Crystal Castles, The Naked and Famous, Young the Giant, Tyga and Warpaint. Reiser is no stranger to SoCal’s indie music scene having previously spent five years as a partner and talent buyer for Costa Mesa’s Detroit Bar.

Shortly after purchasing the Galaxy, Reiser brought in L.A.‘s Foster the People to play the newly dubbed Observatory. Knowing that the club’s pre-existing PA system wouldn’t be adequate to cover the crowd for such a popular band, he turned to Rat Sound to provide a temporary dV-DOSC rig while simultaneously initiating the design process to permanently integrate a new KARAi system.

Today, the Observatory features left and right arrays each comprised of six KARAi elements flown adjacent to two SB18i subs. Four SB28 subs are also located down on the floor—two housed in bunkers inside the stage plus one on each side of the stage.

A custom enclosure built across the front of the stage houses four coaxial 8XT front-fill speakers, while a single 115XT HiQ flown in the center of the house two feet downstage of the stage lip serves as a downfill. All systems are powered and processed by LA8 amplified controllers housed in racks at the monitor mix position.

Rat Sound provided not only the installation of the L-Acoustics arrays, but the rest of the venue’s sound and lighting systems and acoustic treatments as a full turnkey package.

Rat Sound director of installations David Myers notes that the rental dV-DOSC system helped minimize the venue’s downtime to only two nights despite the significant amount of remodeling and equipment upgrades.

“With the new acoustic treatments and KARAi system in place, the Observatory sounds phenomenal,” says Myers. “KARAi is extremely coherent; it’s like having the artist right in front of you in a studio environment. And the bands, engineers, promoters and audiences are all loving the sound. The Naked and Famous recently played the room and their front-of-house engineer told us after the show that we had totally spoiled him for the rest of the dates on their tour.”

Reiser adds, “The Naked and Famous immediately booked another show with us for March and I know that a big part of that was because of how impressed they were with the system and production level. We’ve had a lot of really great shows in here lately—including Scott Weiland, two nights with Young the Giant, and an epic New Year’s weekend with ATB and Tiesto—and everyone’s walked away at the end of the night being very happy with the house sound.”

L-Acoustics

{extended}

Revolabs Enhances HD Control Panel For Entire HD Line Of Wireless Microphone Systems

Revolabs has announced that the company’s Windows-based HD Control Panel software has been enhanced to support the entire HD line of wireless microphone systems, bringing the monitoring and configuration tools found on the Executive HD to the HD Single/Dual Channel and the HD Venue systems.

In addition, based upon customer feedback, Revolabs has created several new features for the HD line, including a DIP switch display, mute groups for Executive HD systems, and an expanded control system API.

With the HD Control Panel, users can monitor and control networked HD wireless microphone systems from a single PC software program with an intuitive graphical user interface.

The HD Control Panel allows users to control the mute status and gain of each microphone, and to lock out presenters from using the mute button.

The software also provides the ability to monitor each microphone closely for its real-time status, such as battery level.

The monitor tab of the HD Control Panel has been enhanced to provide the DIP switch status for each system, eliminating the need to look on the back of the system to see which switches are active.

Revolabs has also added several commands to the HD systems’ API, allowing A/V control systems to send global commands, turn off microphones, and even initiate pairing, all from the convenience of a room’s touch panel.

Finally, Revolabs has bolstered the Executive HD with the ability to assign systems to mute groups. This allows all systems in a building to be bussed together without muting each other, unless they are assigned to the same group.

“We are pleased to bring the capabilities of the HD Control Panel to users of our HD Single/Dual Channel and HD Venue systems, in addition to offering powerful new features across our entire HD line,” says JP Carney, CEO of Revolabs. “We take pride in listening to our customers as we continually strive to meet their evolving needs. New features, such as those released today, are a direct result of customer feedback.”

The enhanced HD Control Panel and new features are available through a firmware update (version 2.6.1) to both the base station and microphones. The update is available now at www.revolabs.com/downloads.

New feature enhancements require a Gold unlock code provided as part of a Revolabs service plan. Any system that has previously been unlocked will automatically receive the new features upon completion of the firmware upgrade.. 

Revolabs

{extended}

One-Stop Shopping: Captain, What Does It Mean, This Term “Full Production”?

The sound company’s job is to advance the show with the artist and show up with a rig. Not so when the full production falls into your lap.

Sound companies handle “one-off” shows every day. It’s usually formulaic, and after a while, we do it by rote. 

But what happens when the client wants one-stop shopping? This is also known as “full production” or “turn key service,” and it’s quite a bit more involved than an average show. Generally months of planning and coordination are needed, as well as work with a number of subcontractors. It just can’t be done by the seat of the pants.

Normally, when a sound company is hired for a show, the client is a promoter or a venue. They provide the stage, they provide the power, and they provide the labor. The sound company’s job is to advance the show with the artist and show up with a rig. Not so when the full production falls into your lap.

Particularly for large, multi-stage festivals, hiring a single source to handle all the entertainment elements of the event is almost a necessity. The event director has too many other things to handle to have to worry about the details of his entertainment. 

Steve Rosenauer, director of the St. Mary’s University Alumni Association Fiesta Oyster Bake in San Antonio, Texas, once told me his definition of full production: “As a client, full production means working with a knowledgeable and experienced company that can produce a turn-key operation with regard to organizing, building and operating the necessary staging, sound, lights and equipment needs, with all meeting the negotiated specifications of the event as well as the bands. A company that does this can greatly enhance the quality of the event and provide a solid peace of mind to the entertainers and the event organizers.”

For the purposes of describing the process of a full production event, I will use the Fiesta Oyster Bake as my example. It’s a two-day, six-stage festival which kicks off San Antonio’s annual Fiesta Celebration every April. Fiesta has been ranked as the second largest party in the U.S. (Mardi Gras being first) by the National Meeting Planners Association. (And yes, they bake tons of oysters!) For years, our company, Sound Services, worked with this event. (Note that we recently chose to close the company for reasons completely unrelated to business.)

PREP MAKES PERFECT
In order to be ready by mid-April, we would start working in November. To be fair, we had been doing this event for nearly a decade, and had amassed a team of subcontractors with whom we were all very comfortable. Until a company gets to this point, preparations probably need to commence even sooner.

In November, we would begin talking about what our needs were going to be. Because city electrical inspectors were involved, we checked the City Code Compliance for any new electrical requirements. For example, one year (and for the first time), we were required to ground all of stages to the audio power distribution services, as well provide non-conductive covering of all power cables running in public areas. Not fun to discover things like this at the last minute!

We provided staging, sound, lights, backline, labor and all technical personnel for the festival. Because the client uses many more generators than just ours, they made those arrangements, but they used our generator provider so we were assured that power would not be a problem. The generator provider also stayed in contact on any change orders he received that might affect us.

Also by November, the client usually had more than half of the talent booked, so we got a vague idea of what to expect from headliners’ riders. By December, we started talking with our subcontractors, discussing what had changed from the previous year, giving them the firm dates, and requesting a firm price by January. 

After ringing in the new year, and still four months out, it was time to nail down the financials. Be very meticulous with this process!  Everything must be committed to paper, and math triple-checked in order to avoid any mistakes that could cost an entire profit margin.

It’s doubly vital to get this facet correct in the first year with an event, because the client will base future projections on those first year costs. Therefore, a mistake probably can’t be made up for next year.

Only after every cost is defined and listed, as well as those of the subcontractors, should the price be committed to the contract submitted to the client. Note: the one thing we found most often overlooked is the cost of a production manager. The hours and hours you spend working on this shouldn’t be done for free!

WORKING IN EARNEST
We would submit our contract on the first of February, with the understanding that requests on artists’ riders would probably cause an increase in total price. By this point, the client had all talent booked, so we could start working in earnest to learn just what those extra costs might be. My goal was to have all this information by the 15th of the month, still two months out.

There is a negotiation with contract riders and advancing the show that can - with some diplomacy - help reduce the number of additional line items for your client. Because most headliners’ riders are based on arena shows, for example, they will often concede some lighting instruments. 

On the other hand, you don’t want artist representatives to think your client is cheap, so know where and when to stop asking for concessions. It’s important to manage your client’s expectations in this regard as well. Most touring artists also understand that festivals differ from concerts, so if the stages are adequately stocked to begin with, most of the added line items will be for backline and spotlights.

Once we determined all of the additional artist-related expenses, we submitted a contract addendum. This addendum should include absolutely everything - a. client will begin to lose confidence if presented with more than one price addition. His budget is set in stone by this time, and your math errors and oversights are not his fault.

MINIMUM OF 40
Because Sound Services was responsible for the entire Oyster Bake Festival, not just the two stages we were physically covering, it was imperative that we advance the show with every artist. In this case, we’re talking a minimum of 40 bands, which made for a lot of work. But it accomplished several very important things. 

First, we got a thorough look at the requirements of every stage, and were assured that each subcontractor could adequately cover the entertainment line-up. If there was a particularly tough set change on a stage at a particular time, we could arrange to have extra help on hand at that time. 

Second, it gave each artist a feeling of confidence to know that individuals who care about their performances run the festival. Third, we established consistency in the way the artists were handled. The subcontracting sound companies all appreciated this.

And fourth, we could apprise artists of the “special quirks” of this festival. For example, it’s held on a university campus that is, itself, located in a neighborhood, not on a major thoroughfare. Getting to the venue is difficult when 80,000 other people are also trying to do the same, and there is no alternate route.

Sometimes when we told first-time performers to allow three hours to arrive, some balked, but we remained adamant. The ones who didn’t believe us were invariably late, which is a no-win for everyone. (By the way, returning artists were never late!)

Further, artists can’t drive to any stages except the main one, because they’re all positioned among campus buildings. For this reason, full backline was provided at every stage, and musicians were discouraged from bringing more gear than they absolutely had to have. To accommodate this, the university set up a team of volunteers to ferry musicians and their gear to the stages. It took several years to streamline this process.

Once all the advance work was complete, we created stage plots and input lists for every stage, and for both days. These were then dispatched to the sound companies working the festival with us.

GETTING CLOSER
A pre-production meeting with the festival committee and all stage managers was held six weeks to two months out. Each committee reported on their progress and, although we weren’t involved in things like pizza ovens and beer sales, it helped us to know what was going to be happening around us. 

Entertainment production is an important part of this meeting, and we made it a real bonding experience. Construction of “Stage 1,” for example, meant an entire campus parking lot has to be closed two days prior to the event, and thus it was critical that the timing be executed properly by the university security department. 

We also got to meet the stage managers and orient them as to what was expected of them. These folks are critical for smooth-running shows, and we let them know that. While their duties are light, the few things we needed from them are all important to the show.

Other things covered in this all-important meeting were issues of water, green rooms, use of volunteers (there are hundreds!) and getting musicians to the event and their respective stages. Over the years, and learning from our mistakes, we developed methods to efficiently accomplish these tasks, but until you’ve worked with an event for a long time, these issues are extremely important to thoroughly think through. For example, from experience we all learned that as much water as we thought we needed - double it!

At this time, we also walked the campus with the festival director, making note of things like trees that needed trimming or light poles tp temporarily remove. (Grounds and electrical departments need to be notified in advance to schedule work like this!)

WHO’S DOING WHAT
By one month out, we had a firm grip on exactly who was doing what. For example, if there was a sound company short a monitor engineer, this was the time to step in and lend a hand. Each subcontractor provided us with a list of personnel and how many vehicles (and of what type) they would be bringing on site. One aspect to double-check: be sure each contractor is providing enough people. For example, backline duties done properly for six stages requires more than two techs.

At this point, we would tally up all production people (including stagehands and spotlight operators) and provide the festival director with the number of parking passes and wristbands needed. Remember - on a multi-day festival, each person might need a fresh wristband each day. We also padded this number by a few more to replace ones that were inevitably lost.

Very key: the best technical person on staff must be in charge of production management. Even with the best preparations, all kinds of little things can go wrong, especially at multiple stages. One person not involved in production at any one stage has to be free to fight the fires, and this person should be well versed in technical knowledge as well as diplomacy. 

Our production manager for the festival spent each day traveling between stages, providing a break to a beleaguered engineer here, dealing with a power problem there, handling a recalcitrant band engineer somewhere else.  He also carried a radio for instantaneous contact. And, this person must have healthy legs – in a very crowded festival, a golf cart won’t work!

Three weeks out, we assembled packets for all of the subcontractors involved.  These included parking passes and wristbands, a map of the campus showing all stages and parking areas, a complete schedule of the event, and for the sound providers, stage plots and input lists. Load-in times were also provided.

Scheduling personnel is critical at this point. We staggered the load-in times so that we could make the best use of our stagehands. Stagehands have a four-hour minimum, and each is usually scheduled to work at more than one stage during a shift.  For load-out, we scheduled a much larger number of stagehands. This schedule was then filed with the labor company as a written work order, and note that this also included spotlight operators as well.

IT’S SHOWTIME!
Two days before the festival, we began to build the stages. The provider arrived with semi-trucks loaded with staging, and we again walked the site with the festival director, spotting the stages, front-of-house risers, spot towers and security towers.

The day prior to opening, we loaded in at our two stages, which then left us free to address the mayhem of everyone else loading in the next morning. The lighting contractor also loaded in with us in order to be out of the way, and this left the lighting directors free to work with headliners who might arrive early. On-site security was continuous at this point.

Day one of the festival would arrive, and we were free to conduct headliner soundchecks on our stages. Fortunately, the first act didn’t begin until 6 pm, so the atmosphere wasn’t too stressful.

The production manager was also available to address the various surprises that unfold, as they invariably will. This is where months of planning pay off and you can look really good to the client, who’s running around putting out all kinds of fires while his production people are calmly doing their jobs.

If all subcontractors are competent and well prepared, the event should run like an average one-off show. One caveat, however: it’s still a multi-day, multi-stage festival, with thousands of people swarming all over, so competent, well-informed stage managers become critical to your existence. 

They aren’t needed to get artists on and off the stage – we had already planned that out. They are most definitely needed to competently answer artist questions - “Where are our food coupons?” and “Where is our dressing room?” and the like. They also kept lots of water on ice, and plenty of ice in the ice chests.

The most important thing stage managers did, however, was manage the radios. Each stage had a radio, as did the production manager and the lead backline technician, and they were on a common channel with the event director. 

As the production staff performed its various tasks, we didn’t have time to monitor a radio, but when we had a problem or needed help, we simply asked a stage manager to contact whomever we needed. Previously we carried individual radios, but learned that this alternative approach worked so much better for everyone, plus it gave the stage managers a sense of ownership of their jobs as well. 

The best advice: “be round.” Roll with the punches and don’t get too excited by the inevitable little surprises that spring up. Make the production of entertainment as smooth as possible and don’t create tension or problems. That’s a big reason you were hired!

THE AFTERMATH
When it’s all over, the results of diligent planning and scheduling should continue to pay off. We found that handling a large number of stagehands at the end of the festival worked best if we arranged for the crew chief to assemble all of them at a pre-arranged site and make assignments from there.

Stagehands were first dispatched to the stages manned by our subcontractors, then re-routed to our stages last.  We always got this show loaded out within our four-hour labor minimum, by the way.

The production manager continued to make a circuit of the stages, being sure each stage had its allotted stagehands and collecting any left-behind belongings. We later attempted to repatriate these items with their owners.

When all the dust cleared a week or two later, we sat down and created a recap of the event, and this went into the file for next year. We also sent this recap to the festival director. Included were a summary of any issues that came up, general incidents, what worked well and what didn’t, and suggestions for improving next year’s event.

By working with the client in this fashion, we made ourselves a part of the event team, and enjoyed a multi-year contract. We also ingratiated ourselves to our subcontracting partners, who appreciated the work and reciprocated when appropriate. 

It’s just good business to develop this kind of working relationship with your clients and fellow business people, and it leaves you feeling pretty good about yourself as well.

Teri Hogan is a long-time audio professional and was co-owner of Sound Services Inc., a sound company based in Texas.

{extended}

Fishman Unveils Triple Play Wireless Guitar Controller

The new Fishman Triple Play Wireless Guitar Controller combines guitar with any virtual instrument or hardware synthesizer to access a wide range of instruments, samples and sounds on stage to expand the depth and impact of live performances.

Triple Play comes with a wireless controller, hexaphonic pickup, and wireless USB receiver. The controller and included software works with industry standard DAWs and vitual instruments and installs quickly on any electric guitar. The system can be easily removed from the guitar because it doesn’t require any permanent installation.

The Triple Play system features several “hold” functions such as sustain, looping, and arpeggiators, along with string or fret splits for multiple instruments.

Also included are menu navigation controls for the included software and a guitar synthesizer volume control. A guitar, mix, synth switch is easily accessible during performances.

A low profile design (less than .5-inch) allows the controller to be left on the guitar and still fit in the case. It operates with a rechargeable Lithium Ion battery (included).

Triple Play’s powered USB wireless receiver interfaces with computers or iOS devices. The system comes with a comprehensive Windows, OSX and iOS software bundle to get users started.

A Triple Play Wireless Guitar Expander option provides additional connectivity for interfacing wireless MIDI signals to computers or iOS devices. It adds a full function USB audio interface with guitar input, bypass and headphone output, MIDI hardware IN and OUT and support for footswitches to extend Triple Play’s capabilities for recording, performing or composing music.

The new Triple Play Wireless Guitar Controller is scheduled for release in June 2012.

Fishman

{extended}

Joe Peavey And Steve Spittle Join QSC Audio

QSC Audio Products has announced the addition of two new members to its professional team, with the appointments of Joe Peavey to the position of product manager, software and Steve Spittle to the position of business development manager.

Peavey will be working with the Q-Sys team to identify and define improvements and additions to Q-Sys software functionality as well as providing high-level technical support. He has a lengthy background in the installed sound market by his work with the family business, Peavey Electronics, specifically working in manufacturing, tech support and finally product manager of the MediaMatrix line of DSP products.

Since leaving Peavey Electronics in 2006, Peavey has focused on creating hardware and software solutions for various audio manufacturers and consulting services for integrators in the U.S. and Canada.

“In the many months since my first interactions with the company, QSC continually amazes me with their attention to the market, their workforce and quality,” says Peavey. “I am proud to join forces with an organization of their caliber and reputation on a product at the top of its game.”

Spittle, in his new role at business development manager, will focus on expanding opportunities for growth in the company’s integrated systems business. He was previously western U.S. sales manager at Avid, and a vice president/owner at Millar Electronics, a manufacturers’ rep firm located in the southeastern U.S.

“QSC makes great products and cares about its customers,” he says. “I’m looking forward to working with this dynamic team to continue to build on this foundation for growth.”

Spittle is located in QSC’s Costa Mesa headquarters, while Peavey is located in the company’s satellite offices in Boulder, CO.

QSC Audio

{extended}

Mojave Audio Debuts MA-101SP Matched Pair Cardioid Condenser Microphones

Mojave Audio has introduced the new MA-101SP, a matched pair of MA-101fet cardioid condenser microphones for use in a range of stereo recording and live sound reinforcement tasks, with instruments such as drums and guitar amplifiers, as well as capturing room ambience and general stereo recording.

Each MA-101fet in the matched pair provides warm, full-bodied reproductions of instruments without the shrillness and high frequency artifacts so often encountered with modern condenser microphones.

The microphone’s warm FET circuitry and externally polarized capacitor mic element combine to deliver low noise and high quality performance.

The MA-101fet features both omni and cardioid polar patterns by way of interchangeable capsules and is outfitted with a 3-micron thick, .8-inch diameter gold sputtered diaphragm.

As one would expect from a David Royer designed microphone, each MA-101fet in the MA-101SP matched pair offer performance specifications that are impressive. Frequency response is 20 Hz - 20 kHz (+/- 3 dB), sensitivity rating is -40 dB (1 volt per pascal), and the distortion rating is less than 1 percent @ 120 dB SPL (-15 db pad off) and less than 1 percent @ 135 dB SPL (-15 dB pad on). The microphones operate on standard 48-volt Phantom power.

Mojave Audio president Dusty Wakeman states, “The new MA-101SP matched pair of microphones is the result of countless requests from the audio community. Drawing upon the strengths of the MA-101fet, these mics are a terrific choice for a wide range of stereo recording tasks where imaging is critical. 

“Engaging the 15 dB pad allows one to take advantage of the fast transient response on instruments such as snares, toms and loud guitar amps. The MA-101SP is a remarkably versatile general purpose recording and sound reinforcement tool that, I’m confident, will find a home in a wide variety of environments.”

The new Mojave Audio MA-101SP ships in a single carrying case that includes a stereo bar. MSRP is $1,195, and availability is Q1, 2012.

Mojave Audio

{extended}

Monday, February 06, 2012

Meyer Sound Promotes Miguel Lourtie To European Technical Services Manager

Meyer Sound has announced Miguel Lourtie as its new European technical services manager, where he will supervise the company’s technical support team in Europe and assume primary responsibility for sales support and design services in the region.

“Customer support is paramount at Meyer Sound,” says John Monitto, Meyer Sound’s director of technical support worldwide. “Our customers expect an extremely high level of technical expertise and customer service. With his outstanding technical skills, customer rapport, experience in the field, and fluency in several languages, Miguel is a great fit to lead our technical group in Europe.”

Lourtie joined Meyer Sound European technical services in 2007, and has played a vital role in supporting a number of major Meyer Sound projects across the continent, including the Mantziusgården Culture Center, Montreux Jazz Festival, and the Grimaldi Forum. He also serves as a seminar instructor as part of Meyer Sound’s extensive education program.

Prior to joining Meyer Sound, Lourtie founded Lourisom, an audio consulting and distribution business in Portugal and previously a Meyer Sound distributor.

“To ensure a seamless show, high-quality audio tools and the person driving the system are equally crucial,” says Lourtie. “The Meyer Sound tech support network has some of the best sound engineers in the industry, and I look forward to working even more closely with them to help our customers get the best out of their Meyer Sound equipment.”

Lourtie will continue to be based in Lisbon, Portugal.

Meyer Sound

{extended}

The Right Sonic Blend For An Electronic Ensemble & The New York Philharmonic

Reinforcing the live performance of a motion picture score at Avery Fisher Hall in Lincoln Center

The Philip Glass Ensemble, along with members of the New York Philharmonic Orchestra and the Collegiate Chorale symphonic choir, recently performed Glass’ powerful score for the 1982 landmark motion picture “Koyaanisqatsi: Life Out Of Balance” as the film screened at Avery Fisher Hall in Lincoln Center.

The two exclusive live performances (and screenings), held on consecutive nights for sold-out audiences at the 2,738-seat home venue of the Philharmonic, presented some sound reinforcement challenges.

The hall does not have a house system, yet the Philip Glass Ensemble, founded by composer Glass in the late 1960s to perform his experimental minimalist music, is always amplified when playing live.

As a result, Dan Dryden, long-time front-of-house engineer for the ensemble, worked with Audio Production Services of Amawalk, NY to design a reinforcement system to serve the unique needs of the event while fitting within the scope of the hall.

“With an event like this you want all of the instruments, acoustic and electronic, to sound like they belong together,” Dryden explains. “The sound system needs to be clean and consistent, in addition to being capable of covering the entire hall without impeding any stage site lines.”

He adds that, in general, he prefers the footprint of compact line arrays, and following a site review, decided that approach would work for this project as well. The choice was the compact RCF TT+ Series, with single arrays each comprised of 10 TTL31-A modules flown left and right, attached to the overhead stage grid.

“When specifying systems for the ensemble I’m looking for smaller line arrays with flat frequency response,” explains Dryden. “These were perfect. The low-mid frequencies are rich and warm, and the coverage was excellent.”

The overall footprint of these arrays indeed was relatively miniscule, measuring just less than two feet wide by only about 10 feet deep. The self-powered, 2-way active line array modules are outfitted with a single-8-inch cone driver and three compression drivers feeding a horn with horizontal dispersion of 100 degrees. They proved capable of covering all four levels of seating (main and three balconies) as well as boxes.

“The arrays had no problem throwing all of the way to the back row of the top balcony without any need for delay fills. We had plenty of power for the space,” Dryden states.

The mains were joined by four RCF TTS56-A dual 21-inch subwoofers, two side-by-side on each side of the stage, and each of these sub sets hosted a single TT25 compact powered loudspeaker supplying in fill presence, particularly for higher frequencies.

The house loudspeaker complement was completed with front fill via four TT052-A low-profile 2-way loudspeakers deployed evenly along the front lip of the stage.

The ensemble, positioned centrally on stage, was comprised of eight players, including three on keyboards, three more on woodwinds, one soprano vocalist, and for this show, a bass vocalist. The orchestra’s 30-piece string section and 19-piece brass section, as well as the 40-member choir, resided in a semi-circle around them.

Each string instrument – violas, cellos and double bass – was outfitted with a DPA 4061 omnidirectional miniature clip-on microphone, while Sennheiser MD 421 II dynamic mics were stand-mounted for each trumpet, trombone, French horn, bass trombone and tuba in the brass section. Each two vocalists of the choir shared a Shure SM58 mic, also stand-mounted.

The ensemble feeds went directly to both front-of-house and monitor consoles, with Dryden manning a Yamaha PM5D board for house and Stephen Erb on another PM5D for monitors.

All of the orchestra and choir feeds (more than 80), meanwhile, routed to a DiGiCo D1 Live console. There, Dan Bora did a mix of the individual stems that were then supplied to the house and monitor consoles.

“One big challenge for a performance of this scale is the number of inputs,” Dryden notes. “In this case we decided to utilize a sub mix, which ended up being a very big job. Not only did Dan Bora have to make sure signal integrity and placement of each of the microphones were good, but the mixes provided to house and monitors were key to the sonic performance.”

All effects were supplied via the PM5D consoles with the exception of a Lexicon 300 reverb at front-of-house that Dryden likes to apply to certain passages or sections.

“The Lexicon algorithms are excellent,” he says. “I’ve used Lexicons forever – for me they’re the smoothest, best-sounding digital reverbs.”

Monitor engineer Erb fed mixes to 12 dBTechnologies DVX D12 powered 2-way loudspeakers that acted as stage monitors for the ensemble - keyboards, woodwinds, soprano vocal and bass vocal.

The strings, brass and chorus sections were served monitor mixes with stand-mounted dBTechnologies K70 multipurpose ultra-compact loudspeakers (also powered).

Dryden reports that the project produced the results he was seeking. “I think it’s always important to remember that you need to work with a room rather than try to impose your will upon it,” he concludes. “In this case, it’s a terrific room and, when equipped with the right system, it sounded fantastic. The musicians in the symphony and the chorus added so much to the ensemble’s performance. It all added up to a lot of fun.”

Julie McLean Clark is a writer and marketing consultant working who has worked in the pro audio industry for more than 15 years.

{extended}

Radial Introduces Shuttle Multi-Function Effects Insert Module For 500 Series

Radial Engineering has introduced the Shuttle, a new multi-function effects insert module for the 500 Series frame format and the Radial Workhorse.

The Shuttle offers three insert loops:

—Loop-1 is a front-panel insert that employs 1/4-inch TRS connectors for fully balanced connectivity
—Insert-2 is an unbalanced insert that is also front panel mounted that easily interfaces to standard effects devices
—Insert-3 is available on the Workhorse using the Omniport, which is wired following convention with tip-send, ring-return, making it ideal to interface with a remote patchbay.

All three loops are equipped with an insert switch that lets the user compare the wet and dry signal paths.

The insert points may also be used as inputs to feed a signal into the Workhorse mix bus. This opens the door to using the Workhorse with source devices such as CD players and iPods or with multi-channel fader packs and so on.

The Shuttle also enables those who own a Workhorse to easily integrate older 500 Series modules into the Workhorse mix buss. One mounts the non-Radial module next to the Shuttle, engages the feed function, and the signal will automatically be routed.

“As soon as our engineers started to integrate the Workhorse within the digital studio environment, they immediately noticed a need to simplify the process of patching effects in and out following what studios would normally do using a patch bay,” says Radial sales manager Steve McKay. “And as we delved further down the rabbit hole, we realized that the 500 Series was limited with respect to performing functions such as overdubbing. The Shuttle addresses these limitations while opening the door to creative new patching options.”

Radial Engineering

{extended}

ESS Audio Outfits Stadion Miejski With System Headlined By Harman Components For Euro 2012 Champ

Polish technology company ESS Audio is midway through an intensive development program that will see the completion of several world-class football stadia by the time Poland co-hosts the UEFA Euro 2012 Championship (along with Ukraine) next summer.

Earlier this year, ESS Audio commissioned an integrated Harman Pro audio components in the new PGE Arena in Gdansk, before turning its attention to Stadion Miejski in Wroclaw, the highest Category 4 Municipal Stadium in the country.

The ESS technical team engaged in a similar fast-fit installation for the rebuilding of the 42,000-capacity stadium, again sourcing most of the equipment from the Harman Pro portfolio.

ESS Audio worked within an innovative architectural concept—devised by JSK Architekci and built by German company, Max Boegl—in which the building is covered by glass fiber mesh coated with a Teflon fiber net façade. As with the successful PGE Arena design, the company used EASE predictions for system optimization, dividing the stadium stands into 14 separate zones, and assigning a zone each to the ancillary UEFA, VIP and Incentive boxes.

ESS Audio has equipped the main bowl and stands with JBL PD Series loudspeakers, with rotated horns, specifying a total of 59 PD5200/95-WRX (90 x 50 degrees) and 28 x PD5200/43-WRX (40 x 30 degrees) weatherized speakers, along with 56 PD5125-WRX weatherized subwoofers. These have mainly been mounted in clusters of five, comprising two PD5200/43-WRX, one PD5200/95-WRX and two PD5125-WRX weatherized speakers.

A further three single PD5200/95’s fire onto the field, with two single clusters playing in front of the LED screens, aiming 90 degrees down to the lower seating. Two additional clusters, comprising a pair of PD5200/95-WRX and PD5125-WRX, are set behind the LED screens for mid and high seat coverage.

With the wind factor a major area for consideration, ESS prepared custom brackets for the PD enclosures, and as a further precaution, secured each PD loudspeaker in the cluster with a steel line covered in polymer.

Powering the rig are 47 Crown CTs3000 amplifiers, fitted with PIP USP4 processor modules, and interfaced with a BSS Soundweb London DSP environment—allowing distribution over CobraNet, and for the system to be remotely controlled and monitored via Harman HiQnet System Architect.

The stadium is divided into a number of dedicated zones, including 20 VIP boxes,10 further Incentive Boxes (and UEFA boxes), a Business Club, a general esplanade / concourse, a fan shop, team zones (including indoor swimming pool) and media zone. In the UEFA, Incentive and VIP areas, a further 90 JBL Control Contractor 8128 ceiling speakers have been specified—powered by Crown CTs600 amplification.

Amp racks are stationed in the four corners of the stadium (each containing a BSS Soundweb London BLU-80 DSP), while an additional BLU-800 processor is located in the Skybox. All five processors are equipped with Input/Output cards.

Each rack also contains an automatic amp changeover (in the unlikely event of amplifier failure), an Edimax switch along with several Moxa optical-Ethernet converters/switches, making the system fully redundant. This is easily interfaced with the stadium’s voice evacuation and fire alarm system via Soundweb London.

Up in the Skybox is the technical control room where a Soundcraft GB4-16 console, a pair of JBL LSR2325P studio monitors, a rack with AKG DMS 700 wireless mic systems, various line devices (players and recorders) and Soundcraft redundant console power supply are located.

From the Skybox music is broadcast and live announcements made, with an adjacent room for evacuation procedures, complete with fireman’s switch.

The installation meets all required standards (including an STI of 0.5). ESS provided full training including use of the Skybox equipment, System Architect software and general problem solving. They will be able to log on and carry out regular health checks under strict safety rules.

According to ESS Audio project manager Witold Karalow, this stadium project has been one of the most challenging the company has undertaken.

Aside from Karalow, the ESS Audio project team in Wroclaw comprised system designer Wojciech Zielinski and BSS Soundweb programmer Konrad Fengler, with Wojciech Kopytek handling system setup and Dariusz Kuta serving as project coordinator.

Harman Pro

{extended}