ProSoundWeb.com - Click to return to PSW Home
 
 

Building Your Own Plate Reverb:

Go To Page

1 2 3 4 5 6 Go To Page

Parts Recommended for Best Performance
Available for Purchase from Errico Associates

www.errico-associates.com

Click on the picture of the plate at the above site to hear MP3s
of a finished plate made using these parts!!!


(You can use this order form or a photocopy of it if you like)

QUAN

PART #

DESCRIPTION

PRICE

 

BRX-7 – B13

Plate Driver (specially designed coneless speaker type)

$89.95

 

MLK-1968

Passive Drive Signal Response Shaper (custom designed for EMT-like sound when used with above driver)

$34.95

 

FU-150

Pickup Transducer (single for mono reverb shielded, extended bandwidth)

$29.95

 

FU-250

Pickup Transducers (pair for stereo reverb shielded, extended bandwidth)

$54.95

 

L 7

Preamp (specifically designed for above pickups with optimum impedance matching, 5 bands of EQ especially chosen to enhance the reverb return, XLR balanced mic and _ inch unbalanced line outputs, and phase reverse switch)

$89.95

 

URAL-7

Preamps (pair of the above for stereo)

$169.95

 

LM2-69

Deluxe Mounting / Isolation Hardware Kit (A baker’s dozen of each of the following: - reinforced fiberglass clevis yokes, 10-32 x 1” socket head cap screws, _’ isolation washers #10 galvanized F washers, 6-32 x 5/8” socket head cap screws, 6-32 aviation style lock nuts, and 1 plate tensioning tool $49.95
PT-CD Tuning and EQ CD (featuring an EMT 140 and a plate built using the above components)

$49.95

 

PT-CD

Tuning and EQ CD (featuring an EMT 140 and a plate built using the above components)

$14.95

 

VFM-FC

Ultimate Plate Kit (contains all of the above at a substantial savings)

$349.95


The above products are available from:

Joseph Errico Associates
PO Box 800
Easton, PA 18044-0800
web site: www.errico-associates.com
email: plateparts@errico-associates.com
toll free: 877/878-5492
fax: 775/521-6427

To place an order, visit our web site at www.errico-associates.com, or send check or money order payable to Joseph Errico Associates for the cost of the items plus tax (if applicable) and shipping.

Pennsylvania orders subject to 6% sales tax.

All orders to the 48 contiguous United States are shipped via UPS ground and are subject to shipping and handling Fees:

Alaska and Hawaii are shipped via UPS 2nd Day Air and are subject to higher shipping and handling fees.

Foreign orders accepted, Must be US funds, checks must be from a US bank. International money orders will be accepted. Recipient is responsible for any taxes and/or tariffs that may be levied. Visit our Website or send an email to request shipping charges.

Allow 4-6 weeks for delivery.

© 1983-2002 Bob Buontempo

Talk Plate Reverb with Bob Buontempo in his PSW Rec Pit forum.

 

Previous Page

Email this story to a friend.

 

You may also want to read these related stories:

Tape Op: Home
Article #1: Splice, Edit and Loop Analog Tapes
Article #2: Share with Engineer Phill Brown
Article #3: Calexico
Article #4: An Interview with Jack Endino
Article #5: The Go-Betweens
Article #6: Ken Nordine, Master of Word Jazz
Article #7: John Hardy, Builder of Mic Preamps
Article #8: Tchad Blake: Recordist As Creative Artist
Article #9: How to Build a Microphone
Article #10: One tube microphone from Berlin and one from Barstow
Article #11: Guerilla recording tricks
Article #12: The db of David Bottrill
Article #13: Death Cab for Cutie
Article #14: Building Your Own plate reverb
Article #15: Bob Ohlsson, magic and the Motown Sound
Article #16: Roger Moutenot - From New York to Nashville
Article #17: Introduction to digital audio.
Article 18: Good drum sound with only three or four tracks
Recording Recipes #4: Flying Musicians

 

 

 

 

Headlines

 
 
 
     

 

 

PSW Install

 
 

Opinion, attitude, insight - a matter of commentary

New take on low-frequency array directivity

Build a thriving contractor customer base

Humor: Wacky amendments to known laws of physics

 
     
 

Community

 
 

Need more info? Ask your community!

Live Audio Board

Rec Pit

Contracting Forum

Lighting Forum

PSW Chat: Info & views from industry leaders

Ken's Links: Get where you need to go - fast!

 
     


© copyright 2008 ProSoundWeb.com
169 Beulah Street, San Francisco, CA, 94117 USA
Voice: 415 387 4009  |  Fax: 415 752 8144
Send comments about this site to webmaster@prosoundweb.com