T-118 cabinets are equipped with a removable back panel that can be disconnected and replaced by an internal TVi “Class D” power amplifier module. Each power amplifier has a built in multi-channel processor that has been chamber tuned to a flat measured response curve with pre set limiters and DSP. One amplified T-118 cabinet will also power up to 3 additional 8 ohm cabinets by NL4 output from the cabinet in which the amplifier is installed.
FEATURES & BENEFITS include Single 18-inch high performance sub-woofer for low frequency, High efficiency design needing less power for high SPL levels, Available in powered or non powered version, Pre-cut foot slots for stacking the subwoofers, Pole mount built on top for pole mounting mid/high cabinets, Perfect for fixed installations or portable sound. All T-Series enclosures are hand wired using premium wire and Neutrik brand NL4 connectors.
1.) Configuration (NL4) 1x18”” sub-woofer
2.) Frequency Response (+/-3 db) 35Hz - 200Hz
3.) Power Handling (watts) 1000 watts
4.) SPL & Sensitivity (1w/1m) 128dB / 100dB
5.) Nominal Beam Width (degrees) Omni-directional
6.) Nominal Impedance 8ohm
7.) Dimensions (H-W-D) 27.48”” x 22.08”” x 22.83”“
8.) Hardware & Features - Pole mount built on top