The T-112 cabinet has cut angles and a pole mount, doubling as a monitor wedge and main speaker. T-Series low-frequency drivers are built with cast frame baskets and all compression drivers have changeable titanium diaphragms for superb sound quality, durability and performance.
FEATURES & BENEFITS include Single 12-inch high performance woofer for mid/low frequency, Single 3” compression driver with titanium diaphragm and 2” exit, High efficiency design needing less power for high SPL levels, Switchable between bi-amp and passive with built in crossover, Available in powered or non powered version, Powered version will power up to 3 additional passive cabinets, Multiple fly points and wall mount brackets available for easy installation, Pole mountable. The T-112 is equipped with a removable back panel that can be disconnected and replaced by an internal TVi “Class D” power amplifier module. Each power amplifier has a built-in multi-channel processor that has been chamber tuned to a flat measured response curve with pre set limiters and DSP. One amplified T-112 cabinet will also power up to 3 additional 8 ohm cabinets on the same signal by NL4 output from the powered cabinet to the non-powered cabinets.
1.) Configuration (NL4) 1x12”“, 1x3”” diaphragm / 2”” exit
2.) Internal Crossover Point 1.8kHz
3.) Frequency Response (+/-3 db) 50Hz - 19.5kHz
4.) Power Handling (watts) 800 watts
5.) SPL & Sensitivity (1w/1m) 131dB / 100dB
6.) Nominal Beam Width (degrees) 60 x 90 (Can be rotated)
7.) Nominal Impedance - Bi-amp LF-8ohm, HF-8ohm - switchable to Passive
8.) Nominal Impedance - Passive 8 ohm - switchable to Bi-amp