All Categories > Power Amplifiers

Powersoft Advanced Technologies M50Q DSP+ETH

Powersoft’s cost effective M50Q DSP+ETH was designed to give the end user access to digital signal processing engine technology, Ethernet connectivity and system monitoring and control through the powerful Armonía Pro Audio Suite™ software. Armonía provides system setup/tuning and real-time management/monitoring of all vital functions from a remote PC via an intuitive single GUI. The four channel, single rack unit offers a maximum output of 1250 watts/channel/4 ohm, and 750 watts/channel/8 ohm.

Powersoft patented bridgeable Class D outputs provide high quality sound, outstanding damping factor and, together with the switch mode power supply, optimal efficiency. This results in reduced operational costs from lower power consumption of both amplifier and external cooling. The M50Q DSP+ETH drives 70V constant voltage lines at 1000 watts per channel. Two banks of 4 presets can be accessed through Armonia or with a rear mounted pushbutton.
The lightweight (under 17 lbs) single rack offers four inputs and outputs along with five bi-quad filters for system equalization, plus two crossovers and eight bi-quad filters per channel. A generous range from zero to 10 ms adjustable delay makes timing the low frequency vs. high frequency speakers easy. The DSP engine delivers up to 114 dB(A) signal to noise ratio (analog in/out) with a fixed 1 ms processing delay time as well as a complete set of limiters including Peak with variable ratio, RMS, and frequency shaping RMS adjustments.

- Power Output: up to 1250W/channel into 4 ohms; 750W/channel into 8 ohms; 1,000W/channel at 70V, 1,250W/channel at 100V; 2,500W/channel pair into 8 ohms
- Frequency Response (1W, 8 ohm): 10 Hz - 30 kHz (+/-3dB)
- Damping factor: > 500 @ 100 Hz - Slew rate (8 ohm): 50V/μs input filter bypassed
- S/ N ratio: > 112dB A-Weighted 20Hz-20kHz
- DSP and Ethernet Configuration: Preset management and extended user functions via Armonía with two sets of 4 presets for two channels, recallable through software or rear panel pushbuttons
- DSP and Ethernet Delay: < 10 ms for each output
- DSP and Ethernet Output Equalization: 6 filters per, type: PEQ, LP & HP shelving, bend-pass, notch, custom FIR
- DSP and Ethernet Input Equalization: 6 filters per channel, type: PEQ, LP & HP shelving, band-pass, notch, all pass
- Consumption/Current draw: All channels driven with 1/8 of max output power @ 4 ohm - 11.2A total consumption at 115V