All Categories > Line Arrays - Small

Alcons Audio USA LR14 ultra-compact pro-ribbon line-array

Non-compressed, 1:1 high-output sound reproduction with up to 90% less distortion than traditional systems; The LR14 passive 2-way ultra-compact pro-ribbon line-array module features the multiple patented Alcons RBN401 pro-ribbon driver; Combined with a maximum SPL of 130dB+, the LR14’s throw and intelligibility redefine standards in this category. As all Alcons line-arrays without “creative horn plumbing”

The LR14 uses Alcons’ proprietary pro-ribbon technology for MHF reproduction; The unusually high 800W peak power handling and crystal-clear response of the RBN401 pro-ribbon driver enables a true HiFi sound reproduction at concert SPL’s. The patented Real-90™ dispersion in combination with the “Morpher”™ lens in the newly developed ALrad™ wave-guide of the RBN401, brings the active frontal radiation of the LR14 up to 94% for an absolute “spike-less” vertical dispersion, while offering a very precise horizontal projection. The frequencies below 1kHz are taken care of by two 6.5” Neodymium mid-bass drivers, making the system real full-range in most applications with its lowest usable frequency being 51Hz. The total system weight is a mere 15kg/33 lb. The LR14 is available with 90°x15° or 120°x15° projection. The LR14 is SIS™ pre-wired; Signal Integrity Sensing ensures complete cable/connector compensation between the LR14 and ALC (damping factor 10.000) resulting in tight and accurate mid and bass response. SIS™ also further reduces distortion.

- RBN401 pro-ribbon HF driver with exceptional intelligibility and “throw”
- Uncompressed 1:1 reproduction of the original sound source.
- Digital dynamics with 1:16 RMS-to-peak ratio under maximum reliability.
- Patented true 90° or 120° horizontal dispersion.
- Very high gain before feedback and super fast transient response.
- Perfect intelligibility with same tonal balance on all SPL’s.
- Versatile system, can be used flown, stacked or on a stick!
- SIS™ pre-wired for very high damping and further reduced distortion (with ALC)