By Bobby Owsinski • December 14, 2016 This article is provided by Bobby Owsinski. Ever wonder why there are so many different compressors and why they all sound different? That’s because back in the analog days there were a number of different ways to achieve compression depending upon the type of electronic building block that you used. Here’s a brief excerpt from The Mixing Engineer’s Handbook that covers the four families of compressors that we generally use today. In the days of analog hardware compressors, there were four different electronic building blocks that could be used to build a compressor. These were: Optical: A light bulb and a photocell were used as the main components of the compression circuit. The time lag between the bulb and the photocell gave it a distinctive attack and release time (like in an LA-2A). Optical compressors don’t react very fast to the oncoming signal, but that actually makes then sound pretty smooth, which is why they’ve become a favorite on vocals and bass. FET: A Field Effect Transistor was used to vary the gain, which had a much quicker response than the optical circuit (a Universal Audio 1176 is a good example). FET compressors are often used on drums because of their quick response. VCA: A Voltage Controlled Amplifier circuit was a product of the 80s and had both excellent response time and much more control of the various compression parameters (the dbx 160 series is an example of a VCA-type compressor, although some models didn’t have a lot of parameter controls). VCA compressors can be very aggressive, which is why the dbx 160 series have long been a favorite on rock kick and snare. Vari-Gain: The vari-gain compressors are sort of a catch-all category because there are other ways to achieve compression besides the first three (like the Fairchild 670 and Manley Variable Mu). You might think of a vari-gain as the ultimate smooth sounding compressor because it was originally made for a radio signal chain, something that had to be as transparent as possible. That said, it’s hard to beat a vari-gain compressor across the mix bus for the added “glue” that’s difficult to get any other way. As you would expect, each of the above has a different sound and different compression characteristics, which is the reason why the settings that worked well on one compressor type won’t necessarily translate to another. The good thing about living in a digital world is that all of these different compressor types have been duplicated by software plugins, so it’s a lot easier (not to mention cheaper) to make an instant comparison on a track and decide which works better in a particular situation. Bobby Owsinski is an author, producer, music industry veteran and technical consultant who has written numerous books covering all aspects of audio recording. For more information be sure to check out his website and blog. Go here to acquire a copy of The Mixing Engineer’s Handbook. About Bobby Bobby Owsinski Music Industry Veteran and Technical Consultant Bobby Owsinski is an author, producer, music industry veteran and technical consultant who has written numerous books covering all aspects of audio recording. For more information and to acquire a copy of The Recording Engineer’s Handbook be sure to check out his website. Comments Leave a Reply Cancel reply Your email address will not be published. Required fields are marked *Comment Name * Email * Website Tagged with: Bobby Owsinski Compressors Equipment Plugins Processors Recording Studio · all topics Subscribe to Live Sound International Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.