Sponsored by

Radial Engineering Introduces Q4 Class-A Parametric Equalizer For 500 Series

Offers four EQ bands with fixed low and high frequency shelving at 100 Hz and 10 kHz, plus two semi-parametric mid bands

By PSW Staff October 3, 2012

The new Radial Q4 parametric equalizer for 500 Series

Radial Engineering has introduced Q4, a new, 100-percent discrete state-variable class-A parametric equalizer.

The Q4 is a line level device designed to interface with balanced pro audio recording systems. It offers four EQ bands with fixed low and high frequency shelving at 100 Hz and 10 kHz, plus two semi-parametric mid bands that span between 300 Hz—2.4 kHz and 1 kHz—12 kHz, respectively.

Each mid band is also equipped with choice of wide or narrow Q to open up the sweet spot or tighten it for surgical precision.

All frequencies are set with up to 12 dB of boost or cut. The EQ may be bypassed to compare the pre and post effect.

According to Radial senior engineer Dan Fraser: “Ever since George Massenburg invented and coined the term ‘parametric equalizer’ in 1972, audio equipment manufacturers have followed suit by employing integrated circuit op-amps to generate the gain in equalizer circuits. This innovation did away with the finicky induction coils and expensive switches that were used in the 1950s and 1960s, bringing affordable EQ circuits to the mass market.

“And although this approach certainly works very well, no company has ever gone back to the purity of 100 percent discrete electronics to produce a true class-A state variable filter design. The Q4 is exactly that. And for the more demanding golden eared engineers, the Q4 will give them an EQ choice that has, up until now, never been commercially available.”

As with all Radial 500 Series modules, the Q4 is encased in steel to provide durability and screening against outside electro-magnetic fields.

Inside, the Q4 has a double sided circuit board with 100 percent discrete through-hole parts. These are hand inserted through-hole wave soldered for optimal signal flow.

When mounted inside a Workhorse rack, the Omniport serves as a 1/4-inch TRS I/O that can be interfaced with a mixer’s insert point using a simple TRS connector.

Fraser continues: “For years, audiophiles and engineers have been touting the sonic advantages of full sized, discrete parts over their miniaturized integrated circuit computer and cell phone counterparts. The preference of using class-A circuits over class-AB or other designs is also well documented.

“Couple this with the fact that 500 series users are looking for the purity of analog and you can immediately understand why the Q4 is so appealing. And once you plug it in, you can immediately hear how good it sounds! There really is nothing like it.”

The Q4 is made in Canada and guaranteed for three years. I will start shipping this month with an estimated retail price of $800 (USD).
Radial Engineering


Leave a Reply

Your email address will not be published. Required fields are marked *

Tagged with:

Subscribe to Live Sound International

Live Sound International brings you information on a wide range of pro audio topics. Stay up-to-date, get expert tips, industry news, new products and technologies delivered.

Discover how to make smart use of today’s sound technology, Subscribe Today!

Latest in Live Sound