Study Hall
Sponsored by
Audio Technica

Church Sound: Pitfalls & Traps To Avoid During Services

I think it's time to talk about what can be done to prevent recurring errors...

By Curt Taipale May 11, 2016

This article is provided by Church

There are many things which shouldn’t happen during a worship service, yet still do. However, unless we’re cognizant of them sometimes it’s hard to prevent them.

So I decided to create a list of those things that just shouldn’t happen in a worship service. Some of these may seem so silly, so expected, so taken for granted that they’re almost not worth saying.

But you’d be surprised how many times I’ve seen these mistakes made in other churches, and even by my own volunteers.

• Don’t miss microphone cues. We can’t afford to not have a mic turned on when it needs to be on. But if you come to one of my workshops, you’ll hear me talk about keeping the number of open mics to a minimum.

That is to say, if the choir’s not singing, don’t have their mics open. If the pastor’s not talking, don’t have his mic on. And so on. But we also need to stay focused so that the pastor doesn’t have to say stuff to the congregation like “Is this thing on?” What an embarrassment.

• Turn off the mics before they hit the stand. It’s purely unprofessional to let a singer put a mic in the clip on a stand without having first muted that channel. If you don’t, the congregation is going to hear a loud thump over the system, or at least over the monitors.

Hopefully the channel mutes on your console also mute the monitor mixes. That way all you have to do is mute each vocal mic channel, and they’ll be muted both in the house and in the monitors simultaneously.

• Mute the guitar channels. Don’t you just hate the loud “buzzzzz-t” that goes with a guitar cable being plugged in or unplugged with the channel open!

If we can equate the word professional with excellence, then it’s unprofessional to not mute those channels in time to save the congregation from that moment. It’s a two-way street though. The sound guys aren’t mind readers, nor have they been assimilated to become one with the automation of the console.

With all that to say, the guitar and bass player in your worship team should give you a moment to mute their channels before unplugging. It’s just common courtesy, a recognition that we’re a team, that the tech support guys and the musicians arc equal members of the worship team.

• If it needs a mic, then mic it. I once watched a sound guy at a church realize that he had forgotten to put a mic on an instrument on stage, and then decide that it was just too much trouble to bother going all the way back downstairs to add the mic. Hmm, not worth the bother?

• Teach your backing vocalists where to stand and how to use a mic. Would someone please tell me why most backing vocalists stand so far away from their stage monitors? I don’t get it.

At one church I used to work at, our vocalists were very compliant and stood where we told them to stand—so they could sec down the throat of the HF horn in their stage monitor. Yet I’ve seen so many vocalists who run away from their monitor. You ask them if it’s too loud and they’ll say no. But they refuse to stand where it will do them the most good.

Those vocalists I used to work with were also careful not to hold their mic to their sides facing down between songs. They simply held it about at their waist, still pointed up.

Think about it. If your vocalists drop the mic to their sides between songs, the zero degrees on-axis point of the mic is going to be aimed at the monitor, which is likely going to make it feedback. There’s nothing worse than 2,000 pairs of eyes from the congregation looking at you when you did nothing to cause the problem.

• Tighten up the fittings on boom stands. One day in college, I was helping set up for a jazz concert. I had been given the responsibility of setting the mic stand with a boom arm and a rather heavy mic on the end of it for a guest saxophone soloist.

At one point during the performance (of course, during a saxophone solo) that boom arm started to slowly drop lower and lower. Guess who was sent out to fix the problem! That’s another mistake I’ve not made since it happened. I’d encourage you to learn from my mistake. (Hey, get your own instead!)

Read the rest of this post


About Curt

Curt Taipale
Curt Taipale

President, Taipale Media Systems
Curt Taipale of Taipale Media Systems heads up Church, a thriving community dedicated to helping technical worship personnel, as well as the Church Sound Boot Camp series of educational classes held throughout the U.S.


Leave a Reply

Your email address will not be published. Required fields are marked *

Tagged with:

Subscribe to Live Sound International

Live Sound International brings you information on a wide range of pro audio topics. Stay up-to-date, get expert tips, industry news, new products and technologies delivered.

Discover how to make smart use of today’s sound technology, Subscribe Today!