By PSW Staff • October 8, 2012 The new Renkus-Heinz Iconyx digitally steerable arrays implemented at the U.S. Capitol Central Rotunda can be seen at the far left and right on the upper level. The Central Rotunda of the United States Capitol building in Washington, D.C. presents a serious acoustical challenge, made up almost entirely of hard, reflective surfaces while measuring 96 feet (29m) in diameter, and just over 180 feet (55 m) high at its peaked canopy. The space is visited by thousands of tourists each day, and is also used as a backdrop for public and ceremonial events. “It’s always been a problematic space,” says Tom Jones, engineer with Baltimore, MD-based Design and Integration, Inc. “It’s got about a nine second reverb time, and vocal intelligibility is just a mess.” Given the building’s landmark status, there was no room for any sound system design that would alter the venue’s aesthetic. “Requirement number one was that nothing could be mounted permanently,” says Jones. Design and Integration’s solution was to create a portable system that could be quickly and easily moved into place, based around Renkus-Heinz Iconyx digitally steerable arrays. “They don’t hold high-profile events more than once or twice a month, but when they do it’s usually top-level government officials – in the past that has included the vice president, speaker of the house, or a visiting dignitary,” Jones explains. “The events are televised on C-Span, so they really need a system that’s highly intelligible with low visibility.” The system includees four Iconyx IC16-R-II arrays, each located at 90 degrees apart along the room’s circumference. “One of the requirements was that the speakers had to be located at the perimeter, to be out of view of audience and cameras,” says Jones. “The Iconyx was great – very narrow and low-profile.” Setting up the Iconyx cabinets on tripods and positioning them is a quick and simple procedure, Jones adds. “We’ve tuned the beams downward, at ear level with the seating, and away from the walls and dome.” Aside from the Rotunda’s acoustics, Jones says another challenge in putting together the sound system is simple logistics. “The space is a major tourist attraction, and at any given time you’ve got literally hundreds of people walking through there,” he explains. “When we were doing the demo, we had a five minute window right after closing at 5 pm. So we were setting up the system while the place was packed with tourists.” Adjacent the Rotunda to the south is the National Statuary Hall, a semi-circular space that was the House of Representatives chamber until 1857. As Jones observes, the portability of Iconyx allows it to be set up in the Statuary Hall just as easily. “We’re using a similar configuration, but it’s a smaller space and a bit less reverberant, and we can cover the whole space with a pair of Iconyx cabinets. We’ve set up presets so they can easily choose the space they want.” Jones reports the system has been a tremendous improvement. “The intelligibility factor is far superior to anything they’ve used in there in the past,” he says. “And being able to cover the entire space with only four self-contained systems is a huge time-saver.” Renkus-Heinz Comments Leave a Reply Cancel reply Your email address will not be published. Required fields are marked *Comment Name * Email * Website Tagged with: Applications Line Arrays Loudspeakers Renkus-Heinz · all topics Subscribe to Live Sound International Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.