QSC Audio Helps Australia Casino Refurbishment Project Achieve Savings

Core 500i-based Q-Sys network saves 15-20 percent on installation costs

By PSW Staff June 16, 2014

Inise the Crown Spas complex in Melbourne, where Digital Living recently implemented a new networked audio solution with a QSC Q-Sys Core processor

A recent audio system upgrade at the Crown Spas complex in Melbourne, Australia saw Digital Living, a Melbourne-based AV integrator, help reduce costs by an estimated 15 to 20 percent by installing a QSC Audio Q-Sys Core 500i processor at the heart of the system.

In addition to the Core 500i processor, the Crown Spas complex audio upgrade also utilizes 22 QSC TSC-3 touchscreens and 15 QSC CX254 4-channel amplifiers. The Crown complex, located on the south bank of the Yarra river, incorporates one of the largest casinos in the world, as well as three hotels, luxury shopping facilities, several nightclubs, a cinema, various restaurants and two spas, including the five-star Crown Spas.

The brief for the new audio system required the routing of four in-house audio streams from the Crown Casino’s main AV control centre to over 40 different zones in the Crown Spas, via a second switch in the luxury Crown Towers hotel. The system also had to integrate the Crown complex’s fire/evacuation Emergency Warning & Intercommunication System (EWIS).

In addition, the system needed to be bi-directional, allowing the spa managers the option of connecting iPods to provide custom soundtracks in the gym and spa rooms. Audio from inputs in the spas and gym areas had to be routable back to the proposed audio management platform for the complex, and accessible from the main control center if required.

Due to the sheer size of the Crown complex, the audio network extends over considerable distances. From the audio inputs in the main control centre to the hotel is over 500 metres (1600 feet), and from the main control center to the various spa and gym rooms is over another 100 metres (300 feet).

When Digital Living first quoted for the refurbishment, the labor costs alone were considerable just to lay all of the proposed network cabling. Much of the existing Crown complex AV infrastructure is connected by fiber-optic cabling, and to similarly specify the new systems at the spa was going to be expensive.

“Giles Brading at TAG, the Australian QSC distributor, suggested we try looking at the numbers again with a Q-Sys system,” explains Matt Price, director at Digital Living. “When we did, we found we could make massive savings.”

Because Q-Sys networks can utilize “off-the-shelf” Ethernet wiring and switches, much of the cost associated with traditional audio cabling and the labor required to install it could be struck from the original quote — and because of the distances involved, this amounted to a large saving.

In the completed Q-Sys network, audio is still routed to and from the Core 500i processor in the main AV control centre to the Crown Towers hotel via fibre-optic cable, but existing fibre connections were used for this leg. From the hotel data racks onwards, all audio is routed on Cat-6 networking cable laid by Digital Living, which connects the Q-Sys I/O frames, TSC-3 touchscreens and CX254 amplifers in the spa and gym areas.

“I was very impressed at the saving we achieved,” continues Price. “We have used QSC amps and speakers on a lot of projects in recent years, but tended to use other products for the audio management layer. We had looked at using Q-Sys on smaller projects, but we hadn’t proposed it for an installation on this scale before. This project made us look into it in more detail, and made us into total converts. The amount of bi-directional traffic that’s passing through those Ethernet connections at the Spa and across the Crown complex is pretty impressive.

“The individual components, such as the Core 500i processor, were a little more expensive than other equipment we have used in the past, but the investment in it was well worth it. Because of the complexity of the wiring and infrastructure required to run this network over this large area, when you looked at the costs of the system as a whole, there was a significant saving with Q-Sys — in the region of 15 to 20 percent to our customer on this project. Given this outcome, and the features and versatility of Q-Sys, it’s now developed into our primary audio networking product.”

QSC Audio


Leave a Reply

Your email address will not be published. Required fields are marked *

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.

Latest in A/V