New German Soccer Stadium Relies On QSC Audio Q-Sys Integrated System Platform

Controls all audio in the stadium from the main operations center

By PSW Staff August 9, 2012

The new Sparda Bank Stadium with a capacity of more than 20,000 and an extensive integrated system; the large image below shows the stadium routing assignments in the Q-Sys Designer software app.

The soccer team Offenbach Kickers, based in western Germany near Frankfurt, have a new home — a futuristic, 25-million Euro stadium sponsored by the local Sparda Bank in their native German state of Hesse.

The stadium houses a QSC Audio Q-Sys integrated system that controls, routes and processes all of the audio feeds and systems in the new facility.

With four weatherproof, covered spectator stands in the style of recently constructed English stadiums, capacity for more than 20,000 spectators, 10 VIP boxes, a special reception area for business club members and various fashionable retail outlets, the new Sparda Bank Stadium was completed in time for the club’s 111th anniversary.

The Q-Sys platform controls all audio in the stadium from the main operations center, including the associated PA/VA system.

In addition, QSC PowerLight amps, in service for many years at the Kickers’ old stadium, have been re-commissioned for use in the new facility, following extensive performance testing at the headquarters of the QSC distributor in Germany, Shure Distribution.

In addition, a QSC CX302 power amp was additionally purchased to power fill-in loudspeakers at the outlying reaches of the stadium.

Cable runs in a large stadium can be up to several hundred meters, particularly in this case where each spectator stand has its own control center.

The center in the main stand also acts as the audio control centre for the whole ground, and houses the Q-Sys Core 1000 processor. This is linked to the other control rooms via a fiber-optic cable network which allows full integration with the Q-Sys I/O Frames in the individual stand control centers.

These in turn act as the audio I/O boxes for the inputs and outputs in each stand, converting the analog signals to digital and back as required.

Most of the design work on the Q-Sys platform at the Sparda Bank stadium was carried out according to the club’s requirements using the Q-Sys Designer software before installation took place on site.

The completed design was loaded into the Core 1000 unit when the units were installed at the stadium, and final adjustments were then made to accommodate the practical realities of the installation.

All the audio systems in the ground can now be adjusted and controlled from a wireless-connected laptop if required.

Looking back, Alexander Hülshorst, head of the stadium reconstruction project at the design and construction company Beckhoff Technik GmbH, comments, “I’ve never worked with an audio networking platform that was so easy to integrate as Q-Sys.”


QSC Audio


Leave a Reply

Your email address will not be published. Required fields are marked *

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.

Latest in A/V