Sign up for ProSoundWeb newsletters
Subscribe today!

Waves Audio Announces Abbey Road Reverb Plates Plugin
Plugin models the original plates, including the harmonic distortion of both the drive and output amps as well as the individual plate/damper behaviors.
+- Print Email Share RSS RSS

Waves Audio (Booth 6620, Hall A) announces the Waves Abbey Road Reverb Plates plugin.

Introduced over half a century ago, plate reverbs have been a fixture of recorded music ever since.

Used most prominently in the ‘60s and ‘70s by pioneering bands, including the Beatles and Pink Floyd, Abbey Road Studios’ original reverb plates — four EMT 140 units — were first installed in 1957 to complement the fixed reverberation times of the studios’ echo chambers.

These beautiful-sounding plates, with a variable reverb time of up to six seconds, were then tweaked to perfection by Abbey Road’s technical engineers.

To keep noise to a minimum, EMI’s Central Research Laboratories designed unique hybrid solid-state drive amps for Plates A, B and C. Plate D remained fully valve-powered on both drive and output stages, allowing a versatile array of sonic characteristics, from warm and dark to lush and smooth.

In each of these original plates, the stereo reverb effect is created by suspending a large sheet of metal with tensioned springs attached to each corner. A transducer injects the metal sheet with audio energy, which is picked up by two contact mics fixed to the surface of the plate. The reverb time can then be adjusted by using an internal damper, and all of this is contained within a large wooden unit.

These Abbey Road plates have been used on countless pop, rock, classical and film recordings over the years, and continue to be used in all kinds of audio production to this day. Waves has now created meticulous models of these unique-sounding units, individually modeling the harmonic distortion of both the drive and output amps as well as the individual plate/damper behaviors.

Key features of the Waves Abbey Road Reverb Plates plugin:
—Precise modeling of four Abbey Road plates (EMT 140), each with its unique sonic character
—A drive control to set the THD characteristics of the in/out amplifiers and the plate sheet itself
—Ability to control the amount of analog noise and hum
—Four original bass cut positions
—Crosstalk between the stereo inputs to get a stereo leak effect

Waves Audio


With Live Sound, You Can Make Anyone Sound Good

A free subscription to Live Sound International is your key to successful sound management on any scale — from a single microphone to a stadium concert. Written by professionals for professionals, each issue delivers essential information on the latest products specs, technologies, practices and theory.
Whether you’re a house monitor engineer, technical director, system technician, sound company owner, installer or consultant, Live Sound International is the best source to keep you tuned in to the latest pro audio world. Subscribe today…it’s FREE!!

Commenting is not available in this weblog entry.



Audio Central