Sign up for ProSoundWeb newsletters
Subscribe today!


Understanding Relationships: Bringing Clarity To Phase, Frequency And Time
+- Print Email Share RSS RSS

One of the most difficult aspects to comprehend in the field of sound is the relationship of phase response, frequency response, and how each relates to time.

Understanding these relationships can help a lot in making optimal choices when you’re deploying and utilizing sound systems.

What the deuce is phase? (Sorry, I was channeling my inner Stewie Griffin.) The term phase response is actually short for “phase versus frequency,” in the way that we typically use the term in our industry.

Likewise, when we speak of frequency response, we usually mean “amplitude versus frequency.”

In both cases, whenever the measured data is graphed, the “X” axis of the response curve – which represents frequency – will run horizontally across the graph.

The vertical “Y” axis represents intensity in an amplitude-versus-frequency response measurement (usually scaled in dB), and it likewise represents phase in a phase-versus-frequency response measurement (typically scaled in degrees).

Do time and phase representations differ? It’s a question I get asked quite a lot. The answer seems a bit elusive, but makes perfect sense once we dissect the characteristics. A phase “lead” or phase “lag” is a way of expressing a time differential in relation to a reference point – which usually is an ideal flat-line phase response.

For example, an equalizer that’s set to “flat” will present a flat phase and frequency response curve. But when a boost or cut is introduced, the frequency response will reflect the newly introduced response curve, as will the phase response (Figure 1).

Figure 1: A representation of a nearly perfect loudspeaker. (Phase is offset from 0 degrees for clarity.) click to enlarge

The Ø (zero) crossing point in which the phase response is absolutely flat will always be at the center of the peak or dip of the graphic or parametric EQ (PEQ) filter. But before and after the center frequency, there will be a phase lead (or lag) depending on whether the filter has been set to boost or cut.

Note that this assumes the use of traditional IIR (Infinite Impulse Response) filters father than newer FIR (Finite Impulse Response) filter types. (See sidebar, IIR vs. FIR.)

Signal – Not Time – Delay

Unlike a digital delay that delays all frequencies in the audible spectrum equally, and is rightly referred to as a signal delay device, a phase lead or lag is a more subtle concept. This can be difficult to grasp, which is why we’re going to explain it carefully.

However, there is no such thing as “time delay.” Only a signal can be delayed in relationship to the universal clock that’s always ticking, mind you.

But before we move forward, ponder this: When we speak of phase, as it relates to the usage of pro audio systems, we’re almost always interested in phase “offset.” We don’t really care about the phase lag from a loudspeaker to a listener (correctly referred to as propagation delay), but we intently care about any offset than might occur when one sound source is referenced to one, or more, other sources.

If multiple sources are not precisely in phase with each other, some of the sonic energy will cancel…and some will add…and this occurs purely as a function of the wavelengths of any given frequency in respect to the physical offset of the radiating devices.


Source: Live Sound International

Discover the art of sound through insightful and in-depth coverage of the people, technologies and ideas that are transforming the professional live audio world.
Subscribe today!
Commenting is not available in this weblog entry.





Sponsored Links