Sign up for ProSoundWeb newsletters
Subscribe today!

Forums Presented By: 
Understanding Loudspeaker Specifications And What They Can Tell You
Knowing how and why loudspeakers do what they do is the critical step in getting the most from any sound system.
+- Print Email Share RSS RSS

What’s wrong with this scenario?

A clean stream of audio, processed through state-of-the-art digital processing devices and amplified by an advanced power amplifier, is delivered to the audience through a cone of paper pulp inside a wooden box.

The weak link in this chain is the box, more commonly known as a loudspeaker. Final sound quality of any system is wholly dependent on the ability of loudspeakers to reproduce the glorious audio presented to it by the upstream components.

In the past century, commercial loudspeakers have gone through slow, steady advancement in development. In contrast, the electronic portions of systems have undergone fundamental changes in physical attributes and methodology, near the speed of light.

However, just because the transducers (loudspeakers) have not kept pace with their electronic counterparts does not mean all is lost.

Quite the contrary, amazing performance cannot be realized with today’s best designs. Knowing how and why loudspeakers do what they do is the critical step in wringing the most from any sound system.

What’s Inside?
A loudspeaker’s task is to convert the electrical signal of the audio system into acoustic energy that humans perceive as sound. In most instances, the closer this output emulates its input, the better, because a known value of input will remain true on the output (i.e. high fidelity).

It’s also important to understand that sub-standard input sources will always detract from sound quality, regardless of the excellence of any given loudspeaker.

Professional loudspeakers usually contain multiple drivers (components) in a single enclosure. The most common design is referred as “two-way,” with two components teaming up to provide output.

Two-way designs usually consist of a 15-inch or 12-inch diameter cone woofer and a smaller-format (1- to 1.5-inch) compression driver coupled to a horn offering a defined coverage pattern.

A typical two-way loudspeaker, shown as the sum of its parts: compression driver on a horn, crossover, and cone woofer, housed in an enclosure of wood, or, increasingly, poly compounds (click to enlarge)

For woofers, which reproduce the lower frequencies, the enclosure provides a plane of operation, a means of directly radiating output into the surrounding atmosphere.

In contrast, compression drivers, which handle high frequencies, would be practically inaudible if directly sent into a coverage space.

Thus the driver must be mated to a horn, to match the driver’s output with the surrounding atmosphere by unfolding the soundwave at a defined rate and dispersion pattern.

As a result, the efficiency of the horn/driver setup is raised dramatically, with only a few watts of input necessary to deliver room-filling levels.

Inside the loudspeaker enclosure, input signal is divided between the two components by a passive dividing network, commonly called a crossover, which directs the low frequencies to the woofer and the high frequencies to the compression driver.

Conventional loudspeakers work much like a car engine, with the cone action of the drivers akin to the movement of the pistons.

The back-and-forth motion of each is the source of power needed to accomplish the work - turning a drive shaft or propagating sound waves.


Commenting is not available in this weblog entry.