Sign up for ProSoundWeb newsletters
Subscribe today!

Tech Tip Of The Day: What Is Tinning?
The what and why that's important to the cable making/repair process...
+- Print Email Share RSS RSS

Provided by Sweetwater.

Q: I want to start repairing and making some of my own cables. However, I came upon a term I’m sure is such common knowledge that my question really shows my ignorance. That said, here goes: what is “tinning”?

I know it’s part of the soldering process, but can you explain why it’s important, etc?

A: Thanks for the question! While it’s indeed common knowledge, there’s no reason for you to know what tinning is unless you’ve soldered before.

So to answer your question, tinning is the process of pre-applying a layer of solder to a wire before it is actually soldered onto another wire, component or circuit board. The idea is to apply solder to the bare strands of wire, consolidating them into one easier-to-manage unit.

For example, if you’re soldering an XLR connector, it’s a good (most would say required) idea to tin the leads of your wires and connections before making the final connection. This makes the final step of the connection simpler, and also keeps errant pieces of wire under control within the tinned piece of the conductor.

For more tech tips go to


With Live Sound, You Can Make Anyone Sound Good

A free subscription to Live Sound International is your key to successful sound management on any scale — from a single microphone to a stadium concert. Written by professionals for professionals, each issue delivers essential information on the latest products specs, technologies, practices and theory.
Whether you’re a house monitor engineer, technical director, system technician, sound company owner, installer or consultant, Live Sound International is the best source to keep you tuned in to the latest pro audio world. Subscribe today…it’s FREE!!

Commenting is not available in this weblog entry.