Sign up for ProSoundWeb newsletters
Subscribe today!

Forums Presented By: 
Symetrix Announces Release Of SymNet Composer DSP Configuration Software
+- Print Email Share RSS RSS

Symetrix has announced the immediate release of SymNet Composer installed sound DSP configuration software. It will be on display at the upcoming 2012 InfoComm show in Las Vegas, booth C10331.

When performing basic Edge hardware configuration, Composer automatically identifies the type of audio I/O module installed in each of the Edge frames’ four I/O card slots (up to 16 channels of local audio).

When connecting multiple Edge frames via Dante gigabit network audio (up to 128 channels total), quick and easy network management is accomplished entirely within the SymNet Composer programming environment.

A fully open architecture application, Composer’s fast and fluid navigation accelerates the audio path design process. System designers exercise complete creative control selecting from a library of over 600 proven DSP processing, routing, mixing, and special purpose modules.

A designer’s proprietary Super-modules (complex blocks of multiple DSP modules and routings) can be exported from or imported into Composer and re-purposed in future projects.

SymNet Composer’s Event Scheduler automatically changes presets at pre-determined dates and times using a familiar Outlook-style calendar. If desired, hardware clocks can be set to sync to network time protocol (NTP).

Composer also configures the Symetrix ARC series of wall panel remotes along with the zero-cost embedded ARC-WEB for wireless control of Edge hardware using Apple and Android mobile devices.

With Composer, any chosen set of controls (i.e. faders, mutes, selectors) can be consolidated and exported to create custom technician or end user virtual control panels from a program called SymVue. There’s no scripting language to learn, no time-consuming graphic design.

Composer supports third-party RS-232 or Ethernet control devices with Symetrix’ human-readable external control protocol.

“DSP is deep in Symetrix’ DNA. Edge hardware, paired with Composer software, is our most exciting commercial audio product yet,” says Paul Roberts, Symetrix vice president of sales and marketing. “Announcements regarding additional audio input/output modules for Edge, as well as on-line training and certification for SymNet Composer, are slated for the very near future.”

The Symetrix technical support staff is available for remote design assistance and in-person training at .(JavaScript must be enabled to view this email address)

Symetrix


Commenting is not available in this weblog entry.